Carbon intensity (CI) of oil and gas production varies widely across global oil plays. Life cycle extraction from certain unconventional plays (
We perform well-to-refinery calculations of CI for major unconventional oil plays in North America and conventional plays in Asia Pacific. This approach accounts for emissions from exploration, drilling, production, processing, and transportation. The analysis tool is an open-source engineering-based model called Oil Production Greenhouse Gas Emissions Estimator (OPGEE). OPGEE makes estimates of emissions accounting using up to 50 parameters for each modeled field. This model was developed at Stanford University. Data sources include government sources, technical papers, satellite observations, and commercial databases.
Applied globally, OPGEE estimates show highest values in areas with extensive flaring of natural gas and very heavy crude oils - heavy oils require large energy inputs (
Unconventional production, especially from light tight oil is the most significant new source of fossil fuels in the last decade. Under a wide variety of carbon constraints, oil usage will continue for many decades and increase in the near term. Operators, governments, and regulators need to be able to avoid "locking in" development of suboptimal resources and instead provide incentives for shale operators to manage resources sustainably. This approach provides quantitative measures of such actions. Oil producers must prepare by eliminating development of marginal projects, elimination of flaring and venting, optimizing hydraulic fracture treatments, using improved recovery methods (
Copyright 2014, International Petroleum Technology Conference This paper was prepared for presentation at the International Petroleum Technology Conference held in Kuala Lumpur, Malaysia, 10-12 December 2014. This paper was selected for presentation by an IPTC Programme Committee following review of information contained in an abstract submitted by the author(s). Contents of the paper, as presented, have not been reviewed by the International Petroleum Technology Conference and are subject to correction by the author(s). The material, as presented, does not necessarily reflect any position of the International Petroleum Technology Conference, its officers, or members. Papers presented at IPTC are subject to publication review by Sponsor Society Committees of IPTC.
As Malaysia’s basins mature, we laid clear strategies to arrest reserves and production decline. Among others, it involved unlocking our stranded resources, designing innovative contracts, developing marginal fields, seating our assets, and intensifying our exploration efforts. That approach resulted in strong performance in 2013. Petronas’ production rates have crossed more than 2 million BOEPD, with about two-thirds of this contributed by fields in Malaysia. We have also had significant gas discoveries in east Malaysia, allowing our gas reserves to hit above the 100 Tcf mark, and are currently managing 100 active production sharing contracts with various international and local companies.
The first Offshore Technology Conference Asia exceeded attendance expectations while providing in-depth panel and technical sessions on the increasingly important Asian energy sector as well as other globally significant upstream trends and technology applications. The conference was held from 25 to 28 March in Kuala Lumpur. Dato' Sri Mohd Najib Tun Haji Abdul Razak, cited the importance of the Asia Pacific region in future global energy activity during his keynote address at the official opening of the first OTC Asia. He was joined at the opening ceremony by YBhg Tan Sri Dato' Shamsul Azhar Abbas, chairman of the OTC Asia Advisory Committee and group chief executive officer (CEO) of Petronas, and Edward Stokes of Chevron, chairman of the OTC Board of Directors. "These are exciting times for the Asian oil and gas industry, and that is why it is apt that the first OTC Asia is being held in Malaysia," he said. "Asia is a continent with a voracious appetite for energy," he said, noting the region's projected 2.5% annual growth in consumption and the fact that Asia will account for more than 60% of total global energy demand in 2030. The region's rising consumption is not being met as local hydrocarbon supplies are in decline and some countries that once were exporters of energy are now importers. "The easy oil is indeed gone," presenting challenges, but also opportunities, for the oil and gas industry, the prime minister said. "We are embarking on a new era of innovation" to help unlock new resources in hard-to-reach places, he said. "We are going further and deeper both literally and with the technology we use." Malaysia has "the perfect mix of ingredients to be a regional energy hub," the prime minister said, because of its The inaugural OTC Asia attracted 25,100 attendees from 88 countries, exceeding initial expectations. "Based on the positive feedback that we have received from speakers, delegates, and visitors on the conference sessions as well as the interactive exhibition floor, OTC Asia 2014 has been an absolute success," Edward Stokes, chairman of the OTC Board of Directors, said at the conference's closing session.
A methodology is outlined for performing desktop studies in geohazard-prone areas to estimate feasibility for subsea cables and pipelines. Various global cases studies are referenced with relevance to development areas in South-East Asia. This involves a review of available geological, geophysical and geotechnical data, to provide guidance for routing, planning of surveys, and geohazard mitigation. Seismic hazard is not discussed in detail as it is comprehensively dealt with elsewhere.
Enhanced subsea construction activity results from increased demand for energy supply and communication networks. The need for transportation of these products often necessitates the crossing of tectonically active areas that may be prone to geohazards which may result in pipeline rupture or cable breakage. Implications of tectonic activity may be direct (e.g. earthquakes), as well as shaping the terrain through imposition of structural controls, and providing potential trigger mechanisms for slope instability and density flows.
Seafloor morphology is characterized on a regional-scale to understand structural controls, and local-scale to identify characters indicative of seafloor rupture, past slope instability, or future flow conduits. Interpretation of geophysical data provides information to feed an evolutionary geological model. This rationalizes periods of tectonic activity with geohazard scenarios, e.g. regional-scale catastrophic slope failures during intense rifting, compared with smaller, discrete landslides during periods of relative quiescence. Integration with available geotechnical data provides information to understand sedimentary processes and inform forward-looking analyses, such as debris-flow modeling. Thus, an estimation can made of magnitude and duration of forces impacting on structures. Examples are provided of how slope failures and sediment density flows may vary on slopes that have been modified by different tectonic processes. Conduits laterally offset by faults, or uplifted by toe-thrusts may limit the downslope run-out of flows; however, linear, fault controlled canyons may permit longer travel distances.
A phased and integrated framework is outlined for early stage geohazard assessment in tectonically active areas to inform feasibility and concept routing studies. The intention of this approach is to ensure early stage decisions can be made with respect to route selection and to maximize the efficiency and effectiveness of future data acquisition.
Copyright 2013, Society of Petroleum Engineers This paper was prepared for presentation at the SPE/ICoTA Coiled Tubing & Well Intervention Conference & Exhibition held in The Woodlands, Texas, USA, 26-27 March 2013. This paper was selected for presentation by an SPE program committee following review of information contained in an abstract submitted by the author(s). Contents of the paper have not been reviewed by the Society of Petroleum Engineers and are subject to correction by the author(s). The material does not necessarily reflect any position of the Society of Petroleum Engineers, its officers, or members. Electronic reproduction, distribution, or storage of any part of this paper without the written consent of the Society of Petroleum Engineers is prohibited. Permission to reproduce in print is restricted to an abstract of not more than 300 words; illustrations may not be copied. The abstract must contain conspicuous acknowledgment of SPE copyright. Abstract A deepwater batch drilling project in north Borneo was planned to produce oil at full potential through water and gas injection wells. The field is located 75 miles offshore in water depths in excess of 3,300 ft. Attempts to mechanically shift the FIV using slickline were unsuccessful, and the contingency plan of intervention using coiled tubing (CT) was commenced to quickly regain wellbore access. With the drilling time constraint and the operational limitation of the rig to accommodate CT equipment access, the well intervention campaign was urged to mitigate the FIV problems and save the wells. Tight deck space to perform pressure control rig-up, limited A-frame height to accommodate coiled tubing lift frame (CTLF) operation, and well completion with small restricted clearance that prevents the maximum performance of the downhole tools are the major challenges faced in this project. A comprehensive job design and planning process was implemented considering the semisubmersible limitations and the restrictions on wellbore access.