A thermal asset in Oman is characterized by a large-scale steam-drive/cyclic-steam-soak development project, underpinned by extensive data gathering. This paper covers the staged field-development methodology, including analysis and evaluation of various development concepts, that enabled the company to optimize both completion design and artificial-lift selection, reducing downtime and lowering operating costs by nearly 50%. In this paper, the authors describe a project to design, field trial, and qualify an alternative solution for real-time monitoring of the oil rim in carbonate reservoirs that overcomes these disadvantages. By racking up exploration agreements in the United Arab Emirates, Oman, and Bahrain, Eni took a big step forward in its pledge to tap into the Middle East’s vast swaths of highly prospective oil and gas acreage. Seismic stimulation, achievable with the implementation of a single tool, requires significantly lower investments than gas, thermal, and chemical injection methods, with minimal environmental impact.
Green fields today mostly can be regarded as marginal fields and successfully developed. It covers the complete assessment of the oil and gas recovery potential from reservoir structure and formation evaluation, oil and gas reserve mapping, their uncertainties and risks management, feasible reservoir fluid depletion approaches, and to the construction of integrated production systems for cost effective development of the green fields. Depth conversion of time interpretations is a basic skill set for interpreters. There is no single methodology that is optimal for all cases. Next, appropriate depth methods will be presented. Depth imaging should be considered an integral component of interpretation. If the results derived from depth imaging are intended to mitigate risk, the interpreter must actively guide the process.
Multistage hydraulically fractured horizontal well completions have come a long way in the last two decades. Much of this advancement can be attributed to the shale gas revolution, from which numerous transformational tools, techniques, and concepts have led to the efficient development of ultralow-permeability resources on a massive scale. Part of this achievement has been through a widespread trial and error approach, with the higher risk/failure tolerance that is a trademark of the statistical nature of the North American unconventional resource business. However, careful consideration must be taken not to blindly apply these techniques in more permeable tight gas formations, which often cover an extensive range of permeability. Inappropriate application can compromise the effectiveness of the hydraulic fracture treatment and impair long-term well productivity.
Khazzan is a tight to low-end conventional gas field in the Sultanate of Oman, with low porosity and permeability in comparison to conventional formations. The target formations comprise extremely hard, highly stressed rocks at high temperature. The development strategy included vertical wells with massive hydraulic fracture treatments and multistage fractured horizontal wells. The former has been largely successful in the higher-permeability areas, and the economic transition from vertical to horizontal well development, based on rock quality, is continuously evolving. Compared to the rapid learning curve achieved through the more than 80 vertical wells drilled to date, fewer horizontal wells have been drilled, and, as a result, the understanding is still relatively immature.
The paper outlines the technical and operational journey experienced in horizontal wells, to prepare the wellbore and ensure a suitable frac/well connection for successful fracturing and well testing. The paper will describe how the intervention tools and practices have varied between the Barik and Amin formations; depending upon rock quality, frac treatment type, drive to maximize operational efficiency and availability of local resources. The differential application of these techniques, that result in measurable under-flush versus in contrast to the typical North American unconventional practice of defined but limited overflush (e.g., pump-down plug-and-perf will be described). Justification for these different approaches in two very different formations will be demonstrated, including supporting evidence of their relative value.
The obstacles that have been faced, overcome and are still ongoing with this campaign highlight the importance of several critical factors: including multi-disciplinary integration and planning, wellbore construction impacts, contractor performance and tool reliability. Although practices for shale and very low permeability sands are well documented, this paper provides a suite of case histories and operational results for horizontal well intervention techniques used in high-pressure and high-temperature sandstones that are in the very specialized transition zone between conventional and unconventional.
Engineers need to predict the production characteristics from hydraulically fractured wells in tight gas fields. Decline curve analysis (DCA) has been widely used over many years in conventional oil and gas fields. It is often applied to tight gas, but there is uncertainty regarding the period of production data needed for accurate prediction.
In this paper decline curve analysis of simulated production data from models of hydraulically fractured wells is used to to develop improved methods for calibrating decline curve parameters from production data. The well models were constructed using data from the Khazzan field in Oman. The impact of layering, permeability and drainage area on well performance is also investigated. The contribution of each layer to recovery and the mechanisms controlling that contribution is explored.
The investigation shows that increasing the amount of production data used to fit a hyperbolic decline curve does not improve predictions of recovery unless that data comes from many years (20 years for a 1mD reservoir) of production. This is because there is a long period of transient flow in tight gas reservoirs that biases the fitting and results in incorrect predictions of late time performance. Better predictions can be made by estimating the time at which boundary dominated flow is first observed (tb), omitting the preceding transient data and fitting the decline curve to a shorter interval of data starting at tb. For single layer cases, tb can be estimated analytically using the permeability, porosity, compressibility and length scale of the drainage volume associated with the well. Alternatively, tb can be determined from the production data allowing improved prediction of performance from 2-layer reservoirs provided that a) there is high cross-flow or b) there is no cross-flow and the lower permeability layer either does not experience BDF during the field life time or it is established quickly.
Africa (Sub-Sahara) Kosmos Energy has made a significant deepwater gas discovery off Senegal. The Guembeul-1 well in the northern part of the St. Louis Offshore Profond license in 8,858 ft of water encountered 331 net ft of gas pay in two excellent-quality reservoirs, the company reported. The results demonstrate reservoir continuity and static pressure communication with the Tortue-1 well, which suggests a single gas accumulation. The mean gross resource estimate for the Greater Tortue complex has risen to 17 Tcf from 14 Tcf as a result of the Guembeul discovery, the company said. Kosmos, the operator, has a 60% interest in the well. Timis (30%) and Petrosen (10%) hold the remaining interest. In Salah Gas has started production from its Southern fields in Algeria.
This seminar covers the fundamental principles concerning how hydraulic fracturing treatments can be used to stimulate oil and gas wells. It includes discussions on how to select wells for stimulation, what controls fracture propagation, fracture width, etc., how to develop data sets, and how to calculate fracture dimensions. The seminar also covers information concerning fracturing fluids, propping agents, and how to design and pump successful fracturing treatments. As the industry wrestles with another price cycle, making sense of the world in which the oil and gas industry will operate is important to understanding the actions (by engineers, corporations, and governments) which must be taken today so that the oil and gas industry may prosper in the future. Hydraulic fracturing has been touted as a ‘new technology’ (though a misnomer) which is opening access to un-tapped value (in the USA) and lowering the cost of energy across the globe by shifting the balance between supply and demand.
You have access to this full article to experience the outstanding content available to SPE members and JPT subscribers. To ensure continued access to JPT's content, please Sign In, JOIN SPE, or Subscribe to JPT For the average oil and gas technical professional who spends hours each day scrutinizing the details, it is easy to forget the big picture. Solving the latest engineering problem comes first. Then comes solving the next one. And the problems are unique to each person and their job function.
The Khazzan field is being developed currently and includes multiple gas-bearing formations. The primary development reservoir is the Barik sandstone, which is characterized by permeabilities on the order of 0.1 to 1 md. An additional reservoir under development is the Amin formation, which lies deeper than the Barik and is perhaps more unconventional in nature, with estimated permeabilities an order of magnitude lower than the Barik formation. Both reservoirs require hydraulic fracturing to produce at economically attractive rates and, as such, carry the same sort of challenges to reservoir understanding inherent to all unconventional plays. This was recognized in advance of the appraisal program, and an approach was taken to address these challenges in a more-holistic fashion, encompassing a full suite of data gathering, including surveillance and well testing. One of the key tools used was DFIT along with associated ACA of the decline to determine reservoir properties. During the appraisal phase, significant rigor was aimed at ensuring high-quality data would be recorded and that an appropriate amount of time would be allocated to monitoring pressure declines to enable valid interpretations. This resulted in the ability to draw a good correlation between data gathered from the ACA operations and data collected from post-fracturing well-test data.
This article, written by Special Publications Editor Adam Wilson, contains highlights of paper SPE 191437, “ACA Practical Considerations: When Is It Accurate and How Should It Be Used To Improve Reservoir Stimulation,” by O.A. Ishteiwy, SPE, M. Jaboob, and G. Turk, BP; S. Dwi-Kurniadi, SPE, Schlumberger; A. Al-Shueili, SPE, A. Al-Manji, and P. Smith, BP, prepared for the 2018 SPE International Hydraulic Fracturing Technology Conference and Exhibition, Muscat, Oman, 16–18 October. The paper has not been peer reviewed.
The use of diagnostic fracture injection tests (DFITs) for prefracture investigation has become routine in the oil field, particularly for understanding reservoir properties and subsequently optimizing hydraulic-fracture design. A key component of an effective DFIT is an after-closure analysis (ACA) to assess the transmissibility of the formation and allow for effective design. This paper describes a DFIT-analysis program and the suitability of the results from ACAs for use in hydraulic-fracture design.
The Khazzan field is being developed currently and includes multiple gas-bearing formations. The primary development reservoir is the Barik sandstone, which is characterized by permeabilities on the order of 0.1 to 1 md. An additional reservoir under development is the Amin formation, which lies deeper than the Barik and is perhaps more unconventional in nature, with estimated permeabilities an order of magnitude lower than the Barik formation. Both reservoirs require hydraulic fracturing to produce at economically attractive rates and, as such, carry the same sort of challenges to reservoir understanding inherent to all unconventional plays. This was recognized in advance of the appraisal program, and an approach was taken to address these challenges in a more-holistic fashion, encompassing a full suite of data gathering, including surveillance and well testing.
One of the key tools used was DFIT along with associated ACA of the decline to determine reservoir properties. During the appraisal phase, significant rigor was aimed at ensuring high-quality data would be recorded and that an appropriate amount of time would be allocated to monitoring pressure declines to enable valid interpretations. This resulted in the ability to draw a good correlation between data gathered from the ACA operations and data collected from post-fracturing well-test data.
Methods and Process Stimulation and Testing Sequence. The approach taken to stimulate and test the wells in Khazzan was to use a dedicated well-test unit. The overall sequence was as follows:
Eni CEO Claudio Descalzi (center) signed heads of agreement with Oman’s oil and gas ministry and BP for possible exploration of Block 77, located 30 km east of the BP-operated Khazzan Field. Eni has added a suite of new exploration opportunities in the Middle East by signing agreements in the United Arab Emirates, Oman, and Bahrain, part of the firm’s campaign over the past year to gain a foothold in the world’s most prolific oil and gas region. Following Abu Dhabi’s first open-block licensing round last April, Eni announced 12 January two concession agreements with Abu Dhabi National Oil Company (ADNOC) in which the Italian firm will serve as operator with a 70% interest of the 8000-sq-km offshore Blocks 1 and 2, northwest of the emirate. The remaining 30% stake will be held by Thailand’s PTT Exploration and Production (PTTEP). The agreements call for Eni and PTTEP to spend $230 million for exploration as well as appraisal of two existing discoveries on the blocks.