Alkinani, Husam H. (Missouri University of Science and Technology) | Al-Hameedi, Abo Taleb T. (Missouri University of Science and Technology) | Dunn-Norman, Shari (Missouri University of Science and Technology) | Al-Alwani, Mustafa A. (Missouri University of Science and Technology) | Lian, David (Missouri University of Science and Technology) | Al-Bazzaz, Waleed H. (Kuwait Institute For Scientific Research)
It is not easy to obtain an optimal hole cleaning for the drilling operation because of the complicated relationship between the drilling parameters influencing hole cleaning. The two viscosity components (e.g. plastic viscosity (PV) and yield point (YP)) and the flow rate (Q) are essential parameters for effective hole cleaning. Thus, understanding the relationship between those parameters will contribute to efficient hole cleaning. The aim of this paper is to explore those relationships to provide optimal hole cleaning.
Descriptive data analytics was conducted for data of more than 2000 wells drilled in Southern Iraq. The data were first cleansed and outliers were removed using visual inspection and box plots. The Pearson correlation (PC), a widely used method to measure the linear relationship between two parameters, was utilized to access the relationships between PV and Q, YP and Q, and YP/PV and Q. Moreover, a 10% sensitivity analysis was escorted to quantify and comprehend those relationships.
The PCs were calculated to be 0.5, 0.076, and 0.22 for the relationships between YP, PV, and YP/PV with Q, respectively. YP had the highest direct relationship with Q, while PV had the lowest. When the YP increases, a sufficient Q has to be provided to initiate the flow and maintain the mud cycle. In addition, to prevent large solid particles from settling due to the slip velocity, sufficient annular and particle velocities have to be achieved. After initiating the flow, an increase in flow rate to overcome resistance due to PV will not be significant. Therefore, YP has more effect on Q than PV. To maximize hole cleaning, thickening ratio (YP/PV) should be increased. This requires an increase in flow rate, which can be quantified by using the sensitivity analysis provided to achieve the required Q for any increase in YP/PV.
Al-Hameedi, Abo Taleb T. (Missouri University of Science and Technology) | Alkinani, Husam H. (Missouri University of Science and Technology) | Dunn-Norman, Shari (Missouri University of Science and Technology) | Al-Alwani, Mustafa A. (Missouri University of Science and Technology) | Lian, David (Missouri University of Science and Technology)
Flow rate (Q) affects many drilling operations and parameters such as equivalent circulation density (ECD), hoisting and lowering the drillstring, and breaking gel strength during circulation. The aim of this work is to understand the relationship between ECD and Q based on flow regimes (e.g. laminar, transitional, and turbulent) to avoid or at least minimize the unwanted consequence during drilling practice.
Field data from over 2000 wells drilled in Iraq were collected and analyzed to identify the physical relationship between flow regimes and ECD to enhance the drilling rates. After visualizing the whole dataset, a decision was made to break down the data into three parts based on flow regimes (e.g. laminar, transitional, and turbulent). Descriptive data mining techniques were utilized to establish the relationship between flow regimes and ECD. By achieving better control of ECD in the well, not only faster and cheaper operations are possible, but also safety will be improved.
Previous studies and literature showed that flow regimes can tremendously affect ECD. Many studies have been conducted to understand the relationship between Q and ECD. Nevertheless, the consideration of flow regimes was not implemented in these studies. Inconsistency in the literature results was identified, some concluded the relationship between Q and ECD to be direct, and others showed it to be inverse. Thus, this paper will eliminate this discrepancy in the literature, and it will show that the flow regimes have a pivotal role in the relationship between Q and ECD.
The results of this paper showed that if the flow regime is laminar, the relationship between ECD and Q is inverse. However, in transitional and turbulent flow regimes, the relationship between ECD and Q is direct. That is because, in the laminar flow regime, the cutting will fall out of suspension due to low Q, which will cause a cutting bed to be built and decreases ECD. As Q increases (entering the transitional and turbulent flows) the cutting bed will be eroded, and most of the cuttings will be suspended in the fluid which will increase ECD.
This study examines and expands the understanding between how the characteristics of flow regimes affect ECD. Additionally, this paper will eliminate the discrepancy in the literature about this relationship between ECD and Q.
The identification of the fluid fill history is a necessity for the development strategy of any field, in particular in the Middle East where tectonic history is often reported to affect fluid distribution and contacts in many fields. The fluid fill concept for a low permeability carbonate field has been re-evaluated and modified from a tilted contact interpretation with imbibition of the deepest unit to a field-wide flat contact and primary drainage saturation distribution. The oil volumes in the reservoir under study are sensitive to minor changes in the structure and fluid fill due to the relatively low structural dip and low permeability transitional nature of the reservoir. The paper highlights the importance of removing preconceptions in data analysis and ensuring consistency on interpretations between different available data sources. It also demonstrates how data quality could completely change the fluid fill concept.
The three main reservoir units of the Lower Shuaiba A, Lower Shuaiba B and Kharaib have been charged from two oil migration events. Structural changes post the first primary drainage are revealed by regional seismic images of the shallower horizons. Due to the rock low permeability, the water saturations are above irreducible value and the whole interval is in the "transition zone". Kharaib unit was believed to be imbibed by the aquifer after charge and was not developed. Three possible fluid fill scenarios were investigated: a) tilted contact due to structural changes post-charge, b) imbibition of the deeper interval, c) primary drainage with field-wide flat contact related to the second pulse of charge. Each scenario impacts the development of the three units positively or negatively. Water saturation logs vs. True Vertical Depth plots were the main diagnostic tool used to rule out fluid fill scenarios. The plots were used to recognise lateral changes of the saturation profile and investigate imbibition signatures. Production data were also used to cross check the expected fluid fill scenario. The resistivity tools’ types and mud resistivities were examined.
This seminar will teach participants how to identify, evaluate, and quantify risk and uncertainty in everyday oil and gas economic situations. It reviews the development of pragmatic tools, methods, and understandings for professionals that are applicable to companies of all sizes. The seminar also briefly reviews statistics, the relationship between risk and return, and hedging and future markets. Strategic thinking and planning are key elements in an organisation’s journey to maximise value to shareholders, customers, and employees. Through this workshop, attendees will go through the different processes involved in strategic planning including the elements of organisational SWOT, business scenario and options development, elaboration of strategic options and communication to stakeholders.
Green fields today mostly can be regarded as marginal fields and successfully developed. It covers the complete assessment of the oil and gas recovery potential from reservoir structure and formation evaluation, oil and gas reserve mapping, their uncertainties and risks management, feasible reservoir fluid depletion approaches, and to the construction of integrated production systems for cost effective development of the green fields. Depth conversion of time interpretations is a basic skill set for interpreters. There is no single methodology that is optimal for all cases. Next, appropriate depth methods will be presented. Depth imaging should be considered an integral component of interpretation. If the results derived from depth imaging are intended to mitigate risk, the interpreter must actively guide the process.
Decisions in E&P ventures are affected by Bias, Blindness, and Illusions (BBI) which permeate our analyses, interpretations and decisions. This one-day course examines the influence of these cognitive pitfalls and presents techniques that can be used to mitigate their impact. Bias refers to errors in thinking whereby interpretations and judgments are drawn in an illogical fashion. Blindness is the condition where we fail to see an unexpected event in plain sight. Illusions refer to misleading beliefs based on a false impression of reality.
The mainly Cenomanian Shilaif formation of Abu Dhabi (UAE) is currently explored and appraised for its shale oil and shale gas potential. The objective is to assess the hydrocarbons resources, the spatial variability of rock and fluid properties as well as highlighting sweet-spots.
The exploration efforts started in 2014, conducting some multidisciplinary regional depositional and petroleum system studies complemented with exploration wells and the acquisition of comprehensive suites of logs, cores and pressured (sidewall) cores.
The Shilaif formation was deposited in a deeper water intrashelf basin and is time equivalent to the adjacent shallow water higher energy Mishrif formation. Non-eroded Shilaif thicknesses vary from 500 to 900 ft from deep basin to slope respectively. The formation can be subdivided into 3-4 composite sequences each with separate source rocks and clean tight carbonates.
The present day structural configuration is inherited from two related regional compressional events; a) a NW-SE compression responsible for the anticline/syncline, lasting from Late Cenomanian to Early Eocene was created by India's continental drift, b) the late Cretaceous (starting in Turonian) emplacement of the Semail ophiolite from NE direction responsible for loading the continental plate and resulting in the creation of a large scale foreland basin. Reactivation of this NE compression occurred during Late Tertiary.
The resulting structuration created two synclines in the south of Abu Dhabi with maximum maturity of 1.1 Vr (TR 0.65). The foreland basin towards the North East has maturity values reaching the dry gas window. The continuous present day stress from a NE direction combined with high overpressures has a strong geomechanical impact with hmin close to overburden in synclinal areas.
This study aims to present the unconventional resource potential of the Late Albian to Early Turonian basinal sequences in Abu Dhabi.
Insights into the local and regional stratigraphic framework as well as structural controls of the depot-centers are presented.
Pola, Jackson (Heriot-Watt University) | Geiger, Sebastian (Heriot-Watt University) | Mackay, Eric (Heriot-Watt University) | Bentley, Mark (Heriot-Watt University) | Maier, Christine (Heriot-Watt University) | Al-Rudaini, Ali (Heriot-Watt University)
We investigate how efficiently oil can be recovered from a carbonate rock during surfactant based enhanced oil recovery (EOR) at the core-scale, particularly when chemical processes change wettability, and analyse how geological heterogeneities, observed at the next larger scale (centimetre to decimetre) impacts the effectiveness of surfactant-based EOR at the inter-well scale.
To quantify how heterogeneity across scales impacts surfactant flooding, we combine laboratory experiments with simulation studies at the core- and inter-well scale. We first analysed a series of surfactant imbibition experiments at different surfactant concentrations (from 0 to 3 wt. %) using reservoir cores from the Wakamuk field, a carbonate reservoir in Indonesia. We then built a 3D simulation model of the laboratory experiment and matched the experimental data to identify the key physical mechanisms (e.g., reduction in interfacial tension (IFT) and wettability alteration) that lead to increased oil recovery. Next, we parametrised the surfactant models using assisted history-matching methods to calibrate the relative permeability and capillary pressure curves as a function of surfactant concentration. These models were then deployed in high-resolution simulations at the inter-well scale. These simulations captured the small-scale geological heterogeneities that are typical for a carbonate reservoir system, e.g., the Shuaiba formation in the Middle East, but are not resolved in field-scale models.
Our core-scale simulations demonstrate a change from co- to counter-current flow in the laboratory experiments and indicate that the resulting increase in oil recovery is due to a combination of IFT reduction, wettability alteration from oil- to water-wet, and capillary pressure restoration; these processes need to be captured adequately at the inter-well scale model. The increase in surfactant concentration above the critical micelle concentration (CMC) (i.e., from 1 to 3 wt. %) triggered the capillary pressure restoration and dominated recovery at the early-time. The changes in relative permeability and capillary curves during the surfactant floods were best modelled using a concentration-based interpolation. There is uncertainty when calibrating surfactant models using laboratory experiments. A key question hence is if geological heterogeneity at the inter-well scale masks these uncertainties.
Results from our high-resolution simulations show that large-scale heterogeneity impacts recovery predictions, but it is the coarsening of the grid, not the upscaling of permeability, that dominates the error in field-scale recovery predictions during surfactant based EOR. Indeed, the error arising from numerical dispersion during grid coarsening can be as large as the error arising when selecting an inaccurately configured surfactant model due to the lack of quality experimental data. Hence appropriate grid refinement, possibly using adaptive grid refinement, needs to be considered when setting up a surfactant based EOR simulation, along with the appropriate configuration of the surfactant model itself.