Ho, Yeek Huey (Petroliam Nasional Berhad, PETRONAS) | Ahmad Tajuddin, Nor Baizurah (Petroliam Nasional Berhad, PETRONAS) | Elharith, Muhammed Mansor (Petroliam Nasional Berhad, PETRONAS) | Dan, Hui Xuan (Petroliam Nasional Berhad, PETRONAS) | Chiew, Kwang Chian (Petroliam Nasional Berhad, PETRONAS) | Tan, Kok Liang (Petroliam Nasional Berhad, PETRONAS) | Tewari, Raj Deo (Petroliam Nasional Berhad, PETRONAS) | Masoudi, Rahim (Petroliam Nasional Berhad, PETRONAS)
Managing a 47-year brownfield, offshore Sarawak, with thin remaining oil rims has been a great challenge. The dynamic oil rim movement has remained as a key subsurface uncertainty especially with the commencing of redevelopment project. A Reservoir, Well and Facilities Management (RWFM) plan was detailed out to further optimize the development decisions. This paper is a continuation from SPE-174638-MS and outlines the outcome of the RWFM plan and the results’ impact towards the development decisions, such as infill well placement and gas/water injection scheme optimization. Key decisions impact by the RWFM findings are highlighted.
One of the RWFM plans is oil rim monitoring through saturation logging to locate the current gas-oil contact (GOC) and oil-water contact (OWC). Cased-hole saturation logs were acquired at the identified observation-wells across the reservoir to map time-lapse oil rim movement and its thickness distribution. Pressure monitoring with regular static pressure gradient surveys (SGS) as well as production data, helped to understand the balance of aquifer strength between the Eastern and Western flanks. Data acquisition opportunity during infill drilling were also fully utilized to collect more solid evidences on oil rim positions, where extensive data acquisition program, including conventional open-hole log, wireline pressure test, formation pressure while drilling (FPWD) and reservoir mapping-while-drilling, were implemented.
The timely collection, analysis and assimilation of data helped the team to re-strategize the development / reservoir management plans, through the following major activities: Re-strategizing water and gas injection plan to balance back oil rim between the Eastern and Western flanks, through deferment of drilling water injectors, optimization of water and gas injectors location and completion strategies due to stronger aquifer encroachment from east and south east. Optimizing infill wells drainage points where 2 wells were relocated based on cased-hole logs, as the first well original location was swept and the second well was successfully navigated through the oil rim using reservoir mapping-while-drilling techniques coupled with cased-hole log results. This resulted in securing an oil gain of 4000 BOPD from these 2 wells. Optimizing infill wells location and planning an additional infill well with potential additional oil gain of approximately 2000 BOPD. The understanding of current contact and aquifer strength from the surveillance data assisted in identifying fit-for-purpose technology for the new wells such as the application of viscosity-based autonomous inflow control device which assisted in placing the well closer to GOC due to the observed rapid rising of water table, this will help sustaining the well life.
Re-strategizing water and gas injection plan to balance back oil rim between the Eastern and Western flanks, through deferment of drilling water injectors, optimization of water and gas injectors location and completion strategies due to stronger aquifer encroachment from east and south east.
Optimizing infill wells drainage points where 2 wells were relocated based on cased-hole logs, as the first well original location was swept and the second well was successfully navigated through the oil rim using reservoir mapping-while-drilling techniques coupled with cased-hole log results. This resulted in securing an oil gain of 4000 BOPD from these 2 wells.
Optimizing infill wells location and planning an additional infill well with potential additional oil gain of approximately 2000 BOPD.
The understanding of current contact and aquifer strength from the surveillance data assisted in identifying fit-for-purpose technology for the new wells such as the application of viscosity-based autonomous inflow control device which assisted in placing the well closer to GOC due to the observed rapid rising of water table, this will help sustaining the well life.
This paper highlights the importance of data integration from geological knowledge, production history, reservoir understanding and monitoring through regular SGS and time-lapse cased-hole saturation logging, coupled with extensive data acquisition during infill drilling. By analyzing and integrating the acquired data, project team can then confidently re-strategize and successfully execute the complex mature oil-rim brownfield redevelopment.
Development of oil rim reservoirs is challenging and could lead to low oil recovery, if multiple determining factors are not well understood, that influences successful field development concept. It requires detailed analysis and development of specific procedures to optimize the oil production from a thin oil rim underlaying gas cap. Few IOR/EOR applications for oil rim development have been reported in the literature so far. This study presents a concept for the optimization of oil production from an oil rim reservoir by numerical simulation.
As a starting point, a representative sector of the field was selected for the initial analysis. It was decided to perform IOR/EOR methods including water/gas flooding/injection and surfactant flooding using inverted five-spot horizontal well pattern, for the application in the selected sector. Upon execution of the detailed sensitivity analysis, the pattern was optimized by its characteristic geometric variables including the length of the vertical/horizontal section of the well, the location of the wells, lateral well distances and the orientation of the pattern. The optimization was performed by setting an objective function to improve recovery factor and reduce water/gas cut by using the differential evolution algorithm. The latter was run until converging, and the optimal solution was used to perform further IOR/EOR studies.
Finally, after selection of a base-case scenario and best well pattern, IOR/EOR options were evaluated, and the comparative results were reported. The generated results show that the application of 5-spot horizontal well pattern in the oil rim reservoir could increase the oil recovery by water flooding, but with low sweep efficiency. The losses of injected water into the underlaying aquifer and up laying gas gap are large. Immiscible gas injection into the gas cap can support the pressure but massively increases the gas cut. In addition, displacement efficiency by gas flooding is poor.
Simulation results of the surfactant flooding case shows better displacement efficiency compared to water flooding. Also, the possibility of reducing residual oil saturation could increase the ultimate oil recovery but at very late time.
This seminar will teach participants how to identify, evaluate, and quantify risk and uncertainty in everyday oil and gas economic situations. It reviews the development of pragmatic tools, methods, and understandings for professionals that are applicable to companies of all sizes. The seminar also briefly reviews statistics, the relationship between risk and return, and hedging and future markets. Strategic thinking and planning are key elements in an organisation’s journey to maximise value to shareholders, customers, and employees. Through this workshop, attendees will go through the different processes involved in strategic planning including the elements of organisational SWOT, business scenario and options development, elaboration of strategic options and communication to stakeholders.
Green fields today mostly can be regarded as marginal fields and successfully developed. It covers the complete assessment of the oil and gas recovery potential from reservoir structure and formation evaluation, oil and gas reserve mapping, their uncertainties and risks management, feasible reservoir fluid depletion approaches, and to the construction of integrated production systems for cost effective development of the green fields. Depth conversion of time interpretations is a basic skill set for interpreters. There is no single methodology that is optimal for all cases. Next, appropriate depth methods will be presented. Depth imaging should be considered an integral component of interpretation. If the results derived from depth imaging are intended to mitigate risk, the interpreter must actively guide the process.
Decisions in E&P ventures are affected by Bias, Blindness, and Illusions (BBI) which permeate our analyses, interpretations and decisions. This one-day course examines the influence of these cognitive pitfalls and presents techniques that can be used to mitigate their impact. Bias refers to errors in thinking whereby interpretations and judgments are drawn in an illogical fashion. Blindness is the condition where we fail to see an unexpected event in plain sight. Illusions refer to misleading beliefs based on a false impression of reality.
SPE, through its Energy4me programme, will present a free one-day energy education workshop for science teachers (grades 8–12). A variety of free instructional materials will be available to take back to the classroom. Educators will receive comprehensive, objective information about the scientific concepts of energy and its importance while discovering the world of oil and natural gas exploration and production. Energy4me is an energy educational public outreach programme that highlights how energy works in our everyday lives and promote information about career opportunities in petroleum engineering and the upstream professions. SPE’s Energy4me programme values the role teachers and energy professionals play in educating young people about the importance of energy.
Today, when most reservoirs have low productivity, the question of whether hydraulic fracturing can be applied to the oil rims becomes very important. During hydraulic fracturing at Novoportovskoe field, the operator was faced with a complex geological model of the reservoir characterized by an absence of strong barriers and minor contrasts in stress between interlayers associated with high risks of breakthrough into the gas zone. An outstanding example of oil rim stimulation and application of new technology was a project in Novoportovskoe field where 30-and 27-stage multistage fracturing operations (MSF) were successfully performed with a shifting ports completion operated by coiled tubing. Currently, oil and gas companies are increasingly demanding technical and technological aspects of the MSF, where the determining factors are the efficiency of operations, the number of stages, the length of the horizontal part of the well, the possibility of refracturing, and ability to open / close sleeves after operation for water and gas shut-off. The experience gained shows the possibilities of modern technologies, where the use of coiled tubing enables meeting the high requirements and also expanding the boundaries of the application. The 30-stage boundary was successfully overcome and allowed to increase the formation coverage by means of more fracturing stages. At the same time, the completion method made it possible to perform MSF without pulling the coiled tubing out of hole and to use all the capabilities and benefits of CT in the case of a screenout (SO). The teamwork between the customer and several of the contractor's product lines enabled successful completion of the integrated project under the difficult geological and climatic conditions of the Novoportovskoe field, which is located beyond the Arctic Circle. An optimized concept of MSF with the use of re-closable full-pass hydraulic fracturing sleeves, operated by a single-trip coiled tubing-conveyed shifting tool was developed and implemented.