A Quarter Century of Progress in the Application of CO2 immiscible EOR Project in Bati Raman Heavy Oil Field in Turkey

Sahin, Secaeddin (Turkish Petroleum Corp) | Kalfa, Ulker (Turkish Petroleum Corp.) | Celebioglu, Demet (Turkish Petroleum Corp.) | Duygu, Ersan (Turkish Petroleum Corp.) | Lahna, Hakki (Turkish Petroleum Corp.)

OnePetro 

Abstract
The Bati Raman field is the largest oil field in Turkey containing approximately 1.85 billion barrels of initial oil in place at an average depth of 4300 ft. The oil is heavy (12o API) with high viscosity and low solution gas. Primary recovery between 1961 and 1986 was less than 2% of OOIP.

The commercial CO2-EOR project began in 1986 and is still active. With the implementation of the CO2 flood, the recovery is expected to potentially reach up to 10% of OOIP.

The reservoir rock is naturally fractured carbonate where the heterogeneities and the unfavorable mobility ratio of CO2 and crude caused inefficient sweep. The solubility of CO2 in the oil, which is highly sensitive to reservoir operating pressure, was a significant factor for the success of the CO2 flood. Currently, the injected agent is increasingly bypassing the remaining oil and the production is curtailed by excessive high gas/oil ratio (GOR) severely jeopardizing recovery. These conditions prompted the use of applications of the conformance-improvement systems in the wells in western part of the field.

Successful applications of fracture plugging polymer gel system intended for the conformance improvement were carried out in the years of 2002 and 2004. Also, to improve the recovery by a better sweep (or displacement), a chemically augmented water injection process was proposed in the areas having relatively lower reservoir pressure. Chemicals were tested for wettability alteration and IFT reduction to select the best performing ones. After an economic analysis, a field trial of the water alternating gas (WAG) injection process with caustic was put into progress in 2010.

Optimized application cases were determined by tuning the total gas injection rates of the field, proration of the individual well rates according to the GOR, investigation of infill drilling, and alteration of the gas injection pattern, based on the results of the simulations carried out in different time frames of the project history.

The Bati Raman immiscible CO2 injection project has been acknowledged as one of the most unique and successful enhanced oil recovery (EOR) applications in the history of fractured heavy-oil carbonate reservoirs. This paper presents a comprehensive overview of this project after a quarter century of experience.