Enhancing Recoveries from a Low Permeable Gas-Condensate Reservoir through Hydraulic-Fracturing and EOR Technologies

Ahmed, Sheraz (Pakistan Petroleum Limited) | Khakwani, Atta M. (Pakistan Petroleum Limited) | Ahmed, Ijaz (Pakistan Petroleum Limited) | Khan, Osama H. (Schlumberger)

OnePetro 

Abstract

The Retrograde Gas-condensate systems have always been found unique both in their flow behavior and their ultimate recovery. This is mainly because of the process of condensation that takes place around the wellbore creating a region of condensate drop out resulting in flow impedance. In addition to it, the dependency of relative permeabilities on positive and negative velocities due to coupling and inertia respectively, further complicates the flow performance. These factors, thus, make an optimum production from these systems a very challenging and difficult task. Therefore, the main aim of this paper is to present a systematic approach towards the recovery optimization of such a low permeable gas condensate reservoir in Pakistan.

There are different production enhancement techniques that are applied to retrograde systems, among which Hydraulic Fracturing (HF) is a very common exercise. This Fracturing, however, also needs the optimization of geometry (i.e. width and length) and flow (i.e. rate) parameters to make it of high value. But, in some instances, despite of the enhanced flow behavior by HF, considerable amount of valuable gas and liquid might still be lost. Therefore, the recovery can be further optimized through techniques such as Water Flood (to increase the pressure back above the dew point), Miscible Gas or CO2 flooding etc.

This study first illustrates the impact of coupling and inertia on hydraulically fractured wells, using 3D reservoir simulation on real time data. A one well sector model is initially developed after validating the history match of the whole field model. Afterwards, the data from the Hydraulic Fracturing jobs, is incorporated to evaluate the positive and negative effects of the gas velocity, along with the recommendations on frac-geometry optimization for such gas condensate reservoirs.

The paper then illustrates the application of different Enhanced Oil Recovery methods on the whole field, using detailed compositional simulation, keeping in view the limitations of hydraulic fracture - as it may not be the answer to optimized recovery. Eventually, a comprehensive strategy has been presented, summarizing all the factors having maximum influence on the ultimate recovery and illustrate the operational and economic aspects of such technologies, to increase the overall gas and condensate production from the field.