Xin, Shuzhen (Daqing Oilfield Co. Ltd.) | Zhang, Qingjie (Daqing Oilfield Co. Ltd.) | Wei, Jianguang (China University of Petroleum, Beijing) | Chen, Ying (Daqing Oilfield Co. Ltd.) | Wang, Rongjiu (Daqing Oilfield Co. Ltd.) | Wang, Jingbo (China University of Petroleum) | Wang, Xiaoqiu
Aiming at the low viscosity of polymer solution, which is compounded with fresh water but diluted with produced water, and at the problems concerning oil displacement efficiency, an onsite test on polymer solution with viscosity stabilizer (PSVS) is carried out. As a result, it has great and guiding significance to the application and popularization of viscosity stabilizer by studying the performance of polymer solution with viscosity stabilizer and its influence on oil displacement efficiency. In this paper, aiming at two different kinds of polymer solutions among which one is compounded with fresh water but diluted with fresh produced water and the other with aerated produced water, two laboratory evaluative tests concerning viscosity stabilization, anti-shear stability, fluidity, and absorbability of polymer solution as well as its oil displacement efficiency are done. The results of onsite application of PSVS are traced and analyzed.
The viscosity stabilization of the polymer solution adding with viscosity stabilizer becomes much better than that of the normal polymer solution. The resistance and the residual resistance factors, the static oil sand adsorption rate and the dynamic core adsorption rate of the solution are all increased markedly. The working viscosity and oil displacement efficiency are improved markedly as well. In comparison with the polymer solution diluted with fresh produced water, the polymer solution diluted with aerated produced water is much better in terms of viscosity stabilization. Comparing with the normal polymer solution with viscosity stabilizer before sheared, the polymer solution which is sheared before adding with viscosity stabilizer performs obviously better in terms of viscosity stability. In contrast to the adjacent block injected with normal polymer solution, the block under onsite flooding test with injection of PSVS features that the average injection pressure increases slightly but keeps steady, the recovery speed of the average monthly water cut of production wells slows down, the thickness of the absorptive layers increases, and the periodic recovery rate improves as well.