|Theme||Visible||Selectable||Appearance||Zoom Range (now: 0)|
Romer, Michael Christopher (ExxonMobil Upstream Research Company) | Spiecker, Matt (ExxonMobil Upstream Research Company) | Hall, Tim James (ExxonMobil Upstream Research Company) | Dieudonne, Raphaël (Hydro Leduc) | Porel, François (Hydro Leduc) | Jerzak, Laurent (Hydro Leduc) | Ortiz, Santos Daniel (KSWC Engineering & Machining) | King, George Randall (KSWC Engineering & Machining) | Gohil, Kartikkumar Jaysingbhai (KSWC Engineering & Machining) | Tapie, William (Deteq Services) | Peters, Michael (MTI) | Curkan, Brandon Alexander (C-FER Technologies)
Summary What do you do after plunger lifting? What if lift gas is not readily available or your liquid level is around a bend? What can you do with a well that has low reservoir pressure, liquid-loading trouble, and fragile economics? Do you give up on the remaining reserves and advance to plugging and abandonment? These questions were considered, and the answers were found to be unsatisfactory. This paper will describe the development and testing of a novel wireline-deployed positive-displacement pump (WLPDP) that was invented to address these challenges. Artificial-lift (AL) pumps have historically been developed with high-producing oil wells in mind. Pumps for late-life wells have mostly been repurposed from these applications and optimized for reduced liquids production. The WLPDP development began with the constraints of late-life wells with the goal of addressing reserves that conventional AL methods would struggle to produce profitably. Internal and industry-wide data were first reviewed to determine what WLPDP specifications would address the majority of late-life wells. The primary target was gas wells, although “stripper” oil wells were also considered. The resulting goal was a pump that could deliver 30 BFPD from 10,000-ft true vertical depth (TVD). The pumping system must be cost-effective to be a viable solution, which led to several design boundaries. Pumps fail and replacement costs can drive economics, so the system must be deployable/retrievable through tubing. The majority of new onshore wells have tortuous geometries, so the system must be able to function at the desired depth despite them—without damaging associated downhole components. The system should use as many off-the-shelf components and known technologies as possible to reduce development costs and encourage integration. Finally, the pump should be able to handle a variety of wellbore liquids, produced gases, and limited solids. The WLPDP was designed to meet the established specifications and boundary conditions. The 2.25-in.-outer-diameter (OD) pump is deployed through tubing. and powered with a standard wireline (WL) logging cable. The cable powers a direct-current (DC) motor that drives an axial piston pump. The piston pump circulates a dielectric oil between two bladders by means of a switching valve. When each bladder expands, it pressurizes inlet-wellbore liquids, pushing them out of the well. Produced gas flows in the annulus between the tubing and production casing. The intake/discharge check valves and bladders are the only internal pump components that contact the wellbore fluids. The WLPDP system was able to meet the design-volume/pressure specifications in all orientations, as confirmed through laboratory and integration testing. Targeted studies were conducted to verify/improve check-valve reliability, gas handling, elastomer suitability, and cable-corrosion resistance. The results of these and related studies will be discussed in the paper.
Swiss oil trader Vitol said on 30 April that its oil and gas subsidiary, Vencer Energy, was buying Hunt Oil Company's assets in the Permian Basin for an undisclosed sum. Media outlets including Bloomberg and Reuters cited sources that pegged the asking price at around $1 billion. Houston-based Vencer was established last year as the trading giant's first foray into the upstream sector. The assets include leases on 44,000 acres in the Midland Basin side of the Permian, with an output about 40,000 BOE/D. "This is an important day for Vencer as it establishes itself as a significant shale producer in the US Lower 48. We expect US oil to be an important part of global energy balances for years to come, and we believe this is an opportune time for investment into an entry platform in the Americas," said Ben Marshall, the head of Vitol's Americas business unit.
Nicholson, A. Kirby (Pressure Diagnostics Ltd.) | Bachman, Robert C. (Pressure Diagnostics Ltd.) | Scherz, R. Yvonne (Endeavor Energy Resources) | Hawkes, Robert V. (Cordax Evaluation Technologies Inc.)
Abstract Pressure and stage volume are the least expensive and most readily available data for diagnostic analysis of hydraulic fracturing operations. Case history data from the Midland Basin is used to demonstrate how high-quality, time-synchronized pressure measurements at a treatment and an offsetting shut-in producing well can provide the necessary input to calculate fracture geometries at both wells and estimate perforation cluster efficiency at the treatment well. No special wellbore monitoring equipment is required. In summary, the methods outlined in this paper quantifies fracture geometries as compared to the more general observations of Daneshy (2020) and Haustveit et al. (2020). Pressures collected in Diagnostic Fracture Injection Tests (DFITs), select toe-stage full-scale fracture treatments, and offset observation wells are used to demonstrate a simple workflow. The pressure data combined with Volume to First Response (Vfr) at the observation well is used to create a geometry model of fracture length, width, and height estimates at the treatment well as illustrated in Figure 1. The producing fracture length of the observation well is also determined. Pressure Transient Analysis (PTA) techniques, a Perkins-Kern-Nordgren (PKN) fracture propagation model and offset well Fracture Driven Interaction (FDI) pressures are used to quantify hydraulic fracture dimensions. The PTA-derived Farfield Fracture Extension Pressure, FFEP, concept was introduced in Nicholson et al. (2019) and is summarized in Appendix B of this paper. FFEP replaces Instantaneous Shut-In Pressure, ISIP, for use in net pressure calculations. FFEP is determined and utilized in both DFITs and full-scale fracture inter-stage fall-off data. The use of the Primary Pressure Derivative (PPD) to accurately identify FFEP simplifies and speeds up the analysis, allowing for real time treatment decisions. This new technique is called Rapid-PTA. Additionally, the plotted shape and gradient of the observation-well pressure response can identify whether FDI's are hydraulic or poroelastic before a fracture stage is completed and may be used to change stage volume on the fly. Figure 1: Fracture Geometry Model with FDI Pressure Matching Case studies are presented showing the full workflow required to generate the fracture geometry model. The component inputs for the model are presented including a toe-stage DFIT, inter-stage pressure fall-off, and the FDI pressure build-up. We discuss how to optimize these hydraulic fractures in hindsight (look-back) and what might have been done in real time during the completion operations given this workflow and field-ready advanced data-handling capability. Hydraulic fracturing operations can be optimized in real time using new Rapid-PTA techniques for high quality pressure data collected on treating and observation wells. This process opens the door for more advanced geometry modeling and for rapid design changes to save costs and improve well productivity and ultimate recovery.
Abstract In this case study, we apply a novel fracture imaging and interpretation workflow to take a systematic look at hydraulic fractures captured during thorugh fracture coring at the Hydraulic Fracturing Test Site (HFTS) in Midland Basin. Digital fracture maps rendered using high resolution 3D laser scans are analyzed for fracture morphology and roughness. Analysis of hydraulic fracture faces show that the roughness varies systematically in clusters with average cluster separation of approximately 20' along the core. While isolated smooth hydraulic fractures are observed in the dataset, very rough fractures are found to be accompanied by proximal smoother fractures. Roughness distribution also helps understand the effect of stresses on fracture distribution. Locally, fracture roughness seems to vary with fracture orientations indicating possible inter-fracture stress effects. At the scale of stage lengths however, we see evidence of inter-stage stress effects. We also observe fracture morphology being strongly driven by rock properties and changes in lithology. Identified proppant distribution along the cored interval is also correlated with roughness variations and we observe strong positive correlation between proppant concentrations and fracture roughness at the local scale. Finally, based on the observed distribution of hydraulic fracture properties, we propose a conceptual spatio-temporal model of fracture propagation which can help explain the hydraulic fracture roughness distribution and ties in other observations as well.
Suarez-Rivera, Roberto (W. D. Von Gonten Laboratories) | Panse, Rohit (W. D. Von Gonten Laboratories) | Sovizi, Javad (Baker Hughes) | Dontsov, Egor (ResFrac Corporation) | LaReau, Heather (BP America Production Company, BPx Energy Inc.) | Suter, Kirke (BP America Production Company, BPx Energy Inc.) | Blose, Matthew (BP America Production Company, BPx Energy Inc.) | Hailu, Thomas (BP America Production Company, BPx Energy Inc.) | Koontz, Kyle (BP America Production Company, BPx Energy Inc.)
Abstract Predicting fracture behavior is important for well placement design and for optimizing multi-well development production. This requires the use of fracturing models that are calibrated to represent field measurements. However, because hydraulic fracture models include complex physics and uncertainties and have many variables defining these, the problem of calibrating modeling results with field responses is ill-posed. There are more model variables than can be changed than field observations to constrain these. It is always possible to find a calibrated model that reproduces the field data. However, the model is not unique and multiple matching solutions exist. The objective and scope of this work is to define a workflow for constraining these solutions and obtaining a more representative model for forecasting and optimization. We used field data from a multi-pad project in the Delaware play, with actual pump schedules, frac sequence, and time delays as used in the field, for all stages and all wells. We constructed a hydraulic fracturing model using high-confidence rock properties data and calibrated the model to field stimulation treatment data varying the two model variables with highest uncertainty: tectonic strain and average leak-off coefficient, while keeping all other model variables fixed. By reducing the number of adjusting model variables for calibration, we significantly lower the potential for over-fitting. Using an ultra-fast hydraulic fracturing simulator, we solved a global optimization problem to minimize the mismatch between the ISIPs and treatment pressures measured in the field and simulated by the model, for all the stages and all wells. This workflow helps us match the dominant ISIP trends in the field data and delivers higher confidence predictions in the regional stress. However, the uncertainty in the fracture geometry is still large. We also compared these results with traditional workflows that rely on selecting representative stages for calibration to field data. Results show that our workflow defines a better global optimum that best represents the behavior of all stages on all wells, and allows us to provide higher-confidence predictions of fracturing results for subsequent pads. We then used this higher confidence model to conduct sensitivity analysis for improving the well placement in subsequent pads and compared the results of the model predictions with the actual pad results.
ABSTRACT The industry is facing significant challenges due to the recent downturn in oil prices, particularly for the development of tight reservoirs. It is more critical than ever to 1) identify the sweet spots with less uncertainty and 2) optimize the completion-design parameters. The overall objective of this study is to quantify and compare the effects of reservoir quality and completion intensity on well productivity. We developed a supervised fuzzy clustering (SFC) algorithm to rank reservoir quality and completion intensity, and analyze their relative impacts on wells' productivity. We collected reservoir properties and completion-design parameters of 1,784 horizontal oil and gas wells completed in the Western Canadian Sedimentary Basin. Then, we used SFC to classify 1) reservoir quality represented by porosity, hydrocarbon saturation, net pay thickness and initial reservoir pressure; and 2) completion-design intensity represented by proppant concentration, number of stages and injected water volume per stage. Finally, we investigated the relative impacts of reservoir quality and completion intensity on wells' productivity in terms of first year cumulative barrel of oil equivalent (BOE). The results show that in low-quality reservoirs, wells' productivity follows reservoir quality. However, in high-quality reservoirs, the role of completion-design becomes significant, and the productivity can be deterred by inefficient completion design. The results suggest that in low-quality reservoirs, the productivity can be enhanced with less intense completion design, while in high-quality reservoirs, a more intense completion significantly enhances the productivity. Keywords Reservoir quality; completion intensity; supervised fuzzy clustering, approximate reasoning,tight reservoirs development
Brinkley, Kourtney (Devon Energy) | Ingle, Trevor (Devon Energy) | Haffener, Jackson (Devon Energy) | Chapman, Philip (Devon Energy) | Baker, Scott (Devon Energy) | Hart, Eric (Devon Energy) | Haustveit, Kyle (Devon Energy) | Roberts, Jon (Devon Energy)
Abstract This case study details the use of Sealed Wellbore Pressure Monitoring (SWPM) to improve the characterization of fracture geometry and propagation during stimulation of inter-connected stacked pay in the South Texas Eagle Ford Shale. The SWPM workflow utilizes surface pressure gauges to detect hydraulically induced fracture arrivals athorizontal monitor locations adjacent to the stimulated wellbore (Haustveit et al. 2020). A stacked and staggered development in Dewitt County provided the opportunity to jointly evaluateprimary completion and recompletion efforts spanning three reservoir target intervals. Fivemonitor wells at varying distances across the unit were employed for SWPM during the stimulation of four wells. An operational overview, analysis of techniques, correlation with seismic attributes, image log interpretations, and fracture model calibration are provided. Outputs from this workflow allow for a refined analysis ofthe overall completion strategy. The high-density, five well monitor array recorded a total of 160 fracture arrivals at varying vertical and lateral distances, with far-field fracture arrivalsprovidingsignificant insight into propagation rates and geometry. Apronounced trend occurred in both arrival frequency and volumes pumped as monitor locations increased in distance from the treatment well. Specific to target zone isolation, it was identified that traversing vertically in section through a high stress interval yielded a 30% reduction inarrival frequency. An indirect relationship between horizontal distance and arrival frequency was also observed when monitoring from the same interval. A decrease in fracture arrivals from 70% down to 8% was realized as offset distance increased from 120 to 1,700 ft. The results from this study have proven to be instrumental in guiding interdisciplinary discussion. Assessing fracture geometry and propagation during stimulation, particularly in the co-development of a stacked pay reservoir, is paramount to the determination of proper completion volume, perforation design, and well spacing. Leveraging the observations of SWPM ultimately provides greater confidence in field development strategy and economic optimization.
Abstract Market-induced production shut-downs and restarts offer us an opportunity to gather step-rate and shut-in data for pressure transient analysis (PTA) and rate transient analysis (RTA). In this study, we present a unified transient analysis (UTA) to combine PTA and RTA in a single framework. In this new approach continuous production data, step-rate data, shut-in data and re-start data can be visualized and analyzed in a single superposition plot, which can be used to estimate both and infer formation pore pressure in a holistic manner by utilizing all available data. Most importantly, we show that traditional log-log and square root of time plots can lead to false interpretation of the termination of linear-flow or power-law behavior. Field cases are presented to demonstrate the superiority of the newly introduced superposition plot, along with discussion on the calibration of long-term bottom-hole pressure with short-term measurements.
Wu, Yinghui (Silixa LLC) | Hull, Robert (Silixa LLC) | Tucker, Andrew (Apache Corp.) | Rice, Craig (Apache Corp.) | Richter, Peter (Silixa LLC) | Wygal, Ben (Silixa LLC) | Farhadiroushan, Mahmoud (Silixa Ltd.) | Trujillo, Kirk (Silixa LLC) | Woerpel, Craig (Silixa LLC)
Abstract Distributed fiber-optic sensing (DFOS) has been utilized in unconventional reservoirs for hydraulic fracture efficiency diagnostics for many years. Downhole fiber cables can be permanently installed external to the casing to monitor and measure the uniformity and efficiency of individual clusters and stages during the completion in the near-field wellbore environment. Ideally, a second fiber or multiple fibers can be deployed in offset well(s) to monitor and characterize fracture geometries recorded by fracture-driven interactions or frac-hits in the far-field. Fracture opening and closing, stress shadow creation and relaxation, along with stage isolation can be clearly identified. Most importantly, fracture propagation from the near to far-field can be better understood and correlated. With our current technology, we can deploy cost effective retrievable fibers to record these far-field data. Our objective here is to highlight key data that can be gathered with multiple fibers in a carefully planned well-spacing study and to evaluate and understand the correspondence between far-field and near-field Distributed Acoustic Sensing (DAS) data. In this paper, we present a case study of three adjacent horizontal wells equipped with fiber in the Permian basin. We can correlate the near-field fluid allocation across a stage down to the cluster level to far-field fracture driven interactions (FDIs) with their frac-hit strain intensity. With multiple fibers we can evaluate fracture geometry, the propagation of the hydraulic fractures, changes in the deformation related to completion designs, fracture complexity characterization and then integrate the results with other data to better understand the geomechanical processes between wells. Novel frac-hit corridor (FHC) is introduced to evaluate stage isolation, azimuth, and frac-hit intensity (FHI), which is measured in far-field. Frac design can be evaluated with the correlation from near-field allocation to far-field FHC and FHI. By analyzing multiple treatment and monitor wells, the correspondence can be further calibrated and examined. We observe the far-field FHC and FHI are directly related to the activities of near-field clusters and stages. A leaking plug may directly result in FHC overlapping, gaps and variations in FHI, which also can be correlated to cluster uniformity. A near-far field correspondence can be established to evaluate FHC and FHI behaviors. By utilizing various completion designs and related measurements (e.g. Distributed Temperature Sensing (DTS), gauges, microseismic etc.), optimization can be performed to change the frac design based on far-field and near-field DFOS data based on the Decision Tree Method (DTM). In summary, hydraulic fracture propagation can be better characterized, measured, and understood by deploying multiple fibers across a lease. The correspondence between the far-field measured FHC and FHI can be utilized for completion evaluation and diagnostics. As the observed strain is directly measured, completion engineering and geoscience teams can confidently optimize their understanding of the fracture designs in real-time.
Grove, Brenden (Halliburton Jet Research Center) | McGregor, Jacob (Halliburton Jet Research Center) | DeHart, Rory (Halliburton Jet Research Center) | Dusterhoft, Ron (Halliburton) | Stegent, Neil (Halliburton) | Grader, Avrami (Ingrain, a Halliburton Service)
Abstract Hydraulically fractured completions dominate industry perforating activity, particularly in North American land basins. This has led to the development of fracture-optimized perforating systems in recent years. Aside from overarching safety, reliability, and efficiency priorities, the main technical performance attribute of these systems is consistent hole size in the casing, driven by limited entry fracture design considerations. While the industry continues to seek further improvements in hole size consistency, attention is also being directed to the perforations more holistically, from a perspective of maximizing the effectiveness of subsequent hydraulic fracturing and ultimately production operations. To this end, this paper presents two related activities addressing the development, qualification, and optimization of perf-for-frac systems. The first is a surface testing protocol used to characterize perforating system performance, in particular casing hole size and consistency. The second is a laboratory program, recently conducted to investigate perforating stressed Eagle Ford shale samples at downhole conditions. This program explored the influences of charge size, formation lamination direction, pore fluid, and dynamic underbalance on perforation characteristics. Casing hole size was also assessed. For the first activity (surface testing), we find that using cement-backed casing can be an important feature to ensure more downhole-realistic results. For the second activity (laboratory program), perforation casing hole sizes for the charges tested were in line with expectations based on existing surface test data, exhibiting negligible pressure dependency. Corresponding penetration depths into the stressed shale samples generally ranged from 3.5-in to 5-in, which is much shallower than might be expected based on surface concrete performance. Dynamic underbalance was found to exhibit some slight effect on the tunnel fill characteristics, while pore system fluid was found to have minimal influence on the results. An interesting feature of the perforated samples was the complex fracture network at the perforation tips, which appeared "propped" to some extent with charge liner debris. Some of these fractures were formation beds which had delaminated during the shot, a phenomenon observed for perforations both parallel and perpendicular to the laminations. The implications of these results to the downhole environment continues to be assessed. Of particular interest is the impact these phenomena might have on fracture initiation, formation breakdown, and treatment stages which accompany subsequent hydraulic fracturing pumping operations.