|Theme||Visible||Selectable||Appearance||Zoom Range (now: 0)|
Abstract Distributed Fiber Optics (DFO) technology has been the new face for unconventional well diagnostics. This technology focuses on measuring Distributed Acoustic Sensing (DAS) and Distrusted Temperature Sensing (DTS) to give an in-depth understanding of well productivity pre and post stimulation. Many different completion design strategies, both on surface and downhole, are used to obtain the best fracture network outcome; however, with complex geological features, different fracture designs, and fracture driven interactions (FDIs) effecting nearby wells, it is difficult to grasp a full understanding on completion design performance for each well. Validating completion designs and improving on the learnings found in each data set should be the foundation in developing each field. Capturing a data set with strong evidence of what works and what doesn't, can help the operator make better engineering decisions to make more efficient wells as well as help gauge the spacing between each well. The focus of this paper will be on a few case studies in the Bakken which vividly show how infill wells greatly interfered with production output. A DFO deployed with a 0.6" OD, 23,000-foot-long carbon fiber rod to acquire DAS and DTS for post frac flow, completion, and interference evaluation. This paper will dive into the DFO measurements taken post frac to further explain what effects are seen on completion designs caused by interferences with infill wells; the learnings taken from the DFO post frac were applied to further escalate the understanding and awareness of how infill wells will preform on future pad sites. A showcase of three separate data sets from the Bakken will identify how effective DFO technology can be in evaluating and making informed decisions on future frac completions. In this paper we will also show and discuss how DFO can measure real time FDI events and what measures can be taken to lessen the impact on negative interference caused by infill wells.
Wu, Yinghui (Silixa LLC) | Hull, Robert (Silixa LLC) | Tucker, Andrew (Apache Corp.) | Rice, Craig (Apache Corp.) | Richter, Peter (Silixa LLC) | Wygal, Ben (Silixa LLC) | Farhadiroushan, Mahmoud (Silixa Ltd.) | Trujillo, Kirk (Silixa LLC) | Woerpel, Craig (Silixa LLC)
Abstract Distributed fiber-optic sensing (DFOS) has been utilized in unconventional reservoirs for hydraulic fracture efficiency diagnostics for many years. Downhole fiber cables can be permanently installed external to the casing to monitor and measure the uniformity and efficiency of individual clusters and stages during the completion in the near-field wellbore environment. Ideally, a second fiber or multiple fibers can be deployed in offset well(s) to monitor and characterize fracture geometries recorded by fracture-driven interactions or frac-hits in the far-field. Fracture opening and closing, stress shadow creation and relaxation, along with stage isolation can be clearly identified. Most importantly, fracture propagation from the near to far-field can be better understood and correlated. With our current technology, we can deploy cost effective retrievable fibers to record these far-field data. Our objective here is to highlight key data that can be gathered with multiple fibers in a carefully planned well-spacing study and to evaluate and understand the correspondence between far-field and near-field Distributed Acoustic Sensing (DAS) data. In this paper, we present a case study of three adjacent horizontal wells equipped with fiber in the Permian basin. We can correlate the near-field fluid allocation across a stage down to the cluster level to far-field fracture driven interactions (FDIs) with their frac-hit strain intensity. With multiple fibers we can evaluate fracture geometry, the propagation of the hydraulic fractures, changes in the deformation related to completion designs, fracture complexity characterization and then integrate the results with other data to better understand the geomechanical processes between wells. Novel frac-hit corridor (FHC) is introduced to evaluate stage isolation, azimuth, and frac-hit intensity (FHI), which is measured in far-field. Frac design can be evaluated with the correlation from near-field allocation to far-field FHC and FHI. By analyzing multiple treatment and monitor wells, the correspondence can be further calibrated and examined. We observe the far-field FHC and FHI are directly related to the activities of near-field clusters and stages. A leaking plug may directly result in FHC overlapping, gaps and variations in FHI, which also can be correlated to cluster uniformity. A near-far field correspondence can be established to evaluate FHC and FHI behaviors. By utilizing various completion designs and related measurements (e.g. Distributed Temperature Sensing (DTS), gauges, microseismic etc.), optimization can be performed to change the frac design based on far-field and near-field DFOS data based on the Decision Tree Method (DTM). In summary, hydraulic fracture propagation can be better characterized, measured, and understood by deploying multiple fibers across a lease. The correspondence between the far-field measured FHC and FHI can be utilized for completion evaluation and diagnostics. As the observed strain is directly measured, completion engineering and geoscience teams can confidently optimize their understanding of the fracture designs in real-time.
Frantz, J. H. (Deep Well Services, Matador Resources Company, Completion Team) | Tourigny, M. L. (Deep Well Services, Matador Resources Company, Completion Team) | Griffith, J. M. (Deep Well Services, Matador Resources Company, Completion Team)
Abstract In conjunction with the industry and basin-wide paradigm shift to drilling and completing extended laterals, Matador Resources Company (the operator) made significant plans in 2018 that would focus activity toward wells with laterals greater than one-mile. One operational hurdle to overcome in this shift change was the effective execution of removing frac plugs and sand at increased depths during a post-stimulation frac plug millout. Utilization of coiled-tubing units (CTUs) had been proven to be a successful millout method in one-mile laterals, but not without risk. Rig-assisted snubbing units coupled with workover rigs (WORs) provided for less risk with higher pulling strength capabilities and the ability to rotate tubing, but would often require operational time of up to twice that of typical coiled-tubing unit millouts. The stand-alone, rigless Hydraulic Completion Unit (HCU) was ultimately tested as a solution and proved to alleviate risks in extended lateral millouts while providing operational time and cost comparable to coiled-tubing units. The operator has since performed post-stimulation frac plug millouts on ~45 horizontal wells in the Delaware Basin using HCUs. The majority of these wells carried lateral lengths of over 1.5 miles. Results and benefits observed by the operator include but are not limited to the list below: 1.) Ability to safely and consistently reach total depth (TD) on extended laterals through increased snubbing/pickup force and the HCU's pipe rotating ability 2.) Ability to pump at higher circulation rates in high-pressured wells (>3,500 psi wellhead pressure) to assist in effective wellbore cleaning 3.) Smaller footprint which allows for the utilization of two units simultaneously on multi-well pads 4.) Time and cost comparable to a standard coiled-tubing millout, particularly on multi-well pads.
Abstract Low-frequency distributed acoustic sensing (LF-DAS) has been used for hydraulic fracture monitoring and characterization. Large amounts of DAS data have been acquired across different formations. The low-frequency components of DAS data are highly sensitive to mechanical strain changes. Forward geomechanical modeling has been the focus of current research efforts to better understand the LF-DAS signals. Moreover, LF-DAS provides the opportunity to quantify fracture geometry. Recently, Liu et al. (2020a;2020b) proposed an inversion algorithm to estimate hydraulic fracture width using LF-DAS data measured during multifracture propagation. The LF-DAS strain data is linked to the fracture widths through a forward model developed based on the Displacement Discontinuity Method (DDM). In this study, we firstly investigated the impacts of fracture height on the inversion results through a numerical case with a four-cluster completion design. Then we discussed how to estimate the fracture height based on the inversion results. Finally, we applied the inversion algorithm to two field examples. The inverted widths are not sensitive to the fracture height. In the synthetic case, the maximum relative error is less than 10% even when the fracture height is two times of the true value. After obtaining the fracture width, the fracture height can be estimated by matching the true strain data under various heights with a strong smooth weight. The error between the calculated strain and true strain decreases as the height is getting close to the true value. In the two field examples, the temporal evolutions of both width summation of all fractures and the width of each fracture show consistent behaviors with the field LF-DAS measurements. The calculated strain data from the forward model matches well with the field LF-DAS strain data. The results demonstrate the robustness and accuracy of the proposed inversion algorithm.
Abstract In the present cost-constrained environment, it is critical that operators effectively complete their wells while minimizing capital expenditure. Optimization efforts focus on increasing recovery factor by managing landing zone, increasing the number of effective fractures, increasing the size of the fractures, and increasing the length of the lateral, while reducing the total number of stages and job size, without sacrificing efficient proppant and fluid delivery. The same pressure to reduce expenditure also impacts decision making on diagnostic evaluation, reducing operators to ‘free’ or low-cost feedback, like surface production rates and decline curves. Operators are responding to these challenges by utilizing a combination of lower cost, post-completion diagnostics like deployed fiber optics, downhole camera evaluation of perforations and radioactive tracers. These less expensive options allow for a broader scope and number of diagnostic inquiries, whereas a permanent fiber may prove to be cost-prohibitive, reducing diagnostic focus to one well, in one part of a play. Combining differing diagnostic technologies enhances the overall description of the well and reservoir behaviors and improves confidence in their interpretation of stimulation and production efficiency; furthermore, where a single diagnostic measurement may be unlikely to justify dramatic change in a completion strategy, a combination of data points from different domains can and does support design change that leads to rapid, real world performance improvements. Care is needed in the conclusions drawn when utilizing complimentary diagnostics due to the differences in depth of investigation and the non-unique interpretation of some data types. This paper discusses three post-completion diagnostic technologies, perforation evaluation by downhole camera, radioactive tracers, and distributed acoustic and temperature sensing (DAS+DTS) data and their respective physical measurements, strengths and weaknesses and how they can be combined to better understand well and reservoir behavior. It concludes with a review of completion optimization efforts from the Rockies area, where these post-completion diagnostic technologies were applied in the evaluation of eXtreme Limited Entry (XLE) trials. A statistical analysis of the RA tracer, downhole camera measurement of perforation area and deployed fiber optic acquisition of DAS+DTS reveals no correlation between diagnostic answers, indicating no one diagnostic measurement can accurately predict the other, such that it could substitute for that diagnostic and provide the same answer. Asking the right question can often enhance the value of diagnostic descriptions of the system in question. Those answers often lead to the next question and clear the path forward in advancing completion optimization. Complimentary diagnostics facilitate a more complete understanding of stimulation and production performance when compared, increasing confidence when they agree. When one or more appear to disagree, the different respective physical measurements and depths of investigation often reveal a more complete and complex understanding of stimulation and production efficiency. As an aggregate they provide clarity on the effect of efforts to create conductive pathways into the reservoir, allowing operators increased control over the resulting production.
Abstract The purpose of this paper is to present a technique to estimate hydraulic fracture (HF) length, fracture conductivity, and fracture efficiency using simple and rapid but rigorous reservoir simulation matching of historical production, and where available, pressure. The methodology is particularly appropriate for analysis of horizontal wells with multiple fractures in tight unconventional or unconventional resource plays. In our discussion, we also analyze the differences between the results from decline curve analysis (DCA) approach and the Science Based Forecasting (SBF) results that this work proposes. When we characterize fracture properties with SBF, we can do a better job of forecasting than if we randomly combine fracture properties and reservoir permeability together in a decline-curve trend. The forecasts are significantly different with SBF, therefore fracture characterization plays an important role and SBF uses this characterization to produce different (and better) forecasts.
Ferrar, Joseph (DuPont Microbial Control) | Maun, Philip (DuPont Microbial Control) | Wunch, Kenneth (DuPont Microbial Control) | Moore, Joseph (DuPont Microbial Control) | Rajan, Jana (DuPont Microbial Control) | Raymond, Jon (DuPont Microbial Control) | Solomon, Ethan (DuPont Microbial Control) | Paschoalino, Matheus (DuPont Microbial Control)
Abstract We report the design, operation and biogenic souring data from a first-of-its kind suite of High Pressure, High Temperature (HPHT) Bioreactors for hydraulically fractured shale reservoirs. These bioreactors vet the ability of microbial control technologies, such as biocides, to prevent the onset of microbial contamination and reservoir souring at larger experimental volumes and higher pressures and temperatures than have been previously possible outside of field trials. The bioreactors were charged with proppant, crushed Permian shale, and sterile simulated fracturing fluids (SSFF). Subsets of bioreactors were charged with SSFF dosed with either no biocide, tributyl tetradecyl phosphonium chloride (TTPC, a cationic surface-active biocide), or 4,4-dimethyloxazolidine (DMO, a preservative biocide). The bioreactors were shut in under 1,000-2,500 psi and elevated temperatures for up to fifteen weeks; hydrogen sulfide (H2S) and microbial counts were measured approximately once per week, and additional microbes were introduced after weeks three and five. Across two separate studies, the bioreactors containing no biocide soured within the first week of shut-in and H2S concentrations increased rapidly beyond the maximum detectable level (343 ppm) within the first three to six weeks of shut-in. In the first study, the bioreactors treated with TTPC soured within two weeks of shut-in (prior to the first addition of fresh microbes), and H2S concentrations increased rapidly to nearly 200 ppm H2S within the first six weeks of shut-in and beyond the maximum detectable level after fifteen weeks of shut-in. The bioreactors containing DMO did not sour during either study until at least the first addition of fresh microbes, and higher levels of the preservative biocide continued to prevent the biogenic formation of H2S even during and after the addition of fresh microbes. Microbial counts correlate with the H2S readings across all bioreactor treatments. The differentiation in antimicrobial activity afforded by the different types of biocide treatments validates the use of these simulated laboratory reservoirs as a biocide selection tool. This first-of-its-kind suite of HPHT Bioreactors for hydraulic fracturing provides the most advanced biocide selection tool developed for the hydraulic fracturing industry to date. The bioreactors will guide completions and stimulation engineers in biocide program optimization under reservoir-relevant conditions prior to beginning lengthy and expensive field trials.
Shahri, Mojtaba (Apache Corp.) | Tucker, Andrew (Apache Corp.) | Rice, Craig (Apache Corp.) | Lathrop, Zach (Apache Corp.) | Ratcliff, Dave (ResFrac) | McClure, Mark (ResFrac) | Fowler, Garrett (ResFrac)
Abstract In the last decade, we have observed major advancements in different modeling techniques for hydraulic fracturing propagation. Direct monitoring techniques such as fibre-optics can be used to calibrate these models and significantly enhance our understanding of subsurface processes. In this study, we present field monitoring observations indicating consistently oriented, planar fractures in an offset-well at different landing zones in the Permian basin. Frac hit counts, location, and timing statistics can be compiled from the data using offset wells at different distances and depths. The statistics can be used to calibrate a detailed three-dimensional fully coupled hydraulic fracturing and reservoir simulator. In addition to these high-level observations, detailed fibre signatures such as strain response during frac arrival to the monitoring well, post shut-in frac propagation and frac speed degradation with length can be modeled using the simulator for further calibration purposes. Application to frac modeling calibration is presented through different case studies. The simulator was used to directly generate the ‘waterfall plot’ output from the fibre-optic under a variety of scenarios. The history match to the large, detailed synthetic fibre dataset provided exceptional model calibration, enabling a detailed description of the fracture geometry, and a high-confidence estimation of key model parameters. The detailed synthetic fibre data generated by the simulator were remarkably consistent with the actual data. This indicates a good consistency with classical analytical fracture mechanics predictions and further confirm the interpretation of planar fracture propagation. This study shows how careful integration of offset-well fibre-optic measurements can provide detailed characterization of fracture geometry, growth rate, and physics. The result is a detailed picture of hydraulic fracture propagation in the Midland Basin. The comparison of the waterfall plot simulations and data indicate that hydraulic fractures can, in fact, be very well modeled as nearly-linear cracks (the ‘planar fracture modeling’ approach).
Abstract Early hydraulic fracturing completions in the Vaca Muerta Formation in central Argentina have incorporated the use of conventional fluid systems, such as linear and crosslinked guar-based polymers. Within the past few years, however, the benefits of viscosifying friction reducers (VFR) have been demonstrated in the industry, predominantly within the United States. The objective of this project was to trial the VFR fluid technology in fracturing operations in this area for potential use for full field development. After studying the potential advantages of the VFR technology including cost savings, simplified operations and enhanced well production, a project was initiated to determine if those same benefits could be obtained. To accomplish this, studies were performed to ensure economic and technical justification through a stepwise process of laboratory testing, logistical and operational considerations, a single well field trial, and a five well development phase evaluation project. The pilot project was performed on a horizontal, 27 stage lateral in the Aguada Pichana Oeste field in the Neuquen Basin of Argentina. The five well development phase evaluation project was performed in the Lindero Atravesado field. Positive laboratory test results led to a field trial using this technology, during which several benefits of the VFR fluid system began to emerge. Operational efficiency was an early success, including a reduction in the quantity of chemicals on location, more simplified pumping schedules, and low pumping pressures. Secondly, significant cost savings were realized compared to previous fluid system packages. Finally, positive production results were observed, leading to the decision to incorporate this technology into full field development operations. This paper will review the results of the stepwise evaluation process along with a focus on the economic benefits and well production from the development phase evaluation project. This paper describes the transition by Pan American Energy (PAE) from conventional fracturing fluids to viscosifying friction reducer (VFR) technology in the Vaca Muerta Formation. The paper highlights the performance of a relatively new treatment fluid which delivered positive results in a strategic international asset. The project has led to full field development using this technology. The same efficiencies provided by this system can potentially be realized through applications in other basins.
Dontsov, Egor (ResFrac Corporation) | Suarez-Rivera, Roberto (W. D. Von Gonten Laboratories) | Panse, Rohit (W. D. Von Gonten Laboratories) | Quinn, Christopher (W. D. Von Gonten Laboratories) | LaReau, Heather (BP America Production Company, BPx Energy Inc.) | Suter, Kirke (BP America Production Company, BPx Energy Inc.) | Hines, Chris (BP America Production Company, BPx Energy Inc.) | Montgomery, Ryan (BP America Production Company, BPx Energy Inc.) | Koontz, Kyle (BP America Production Company, BPx Energy Inc.)
Abstract As the number of wells drilled in regions with existing producing wells increases, understanding the detrimental impact of these by the depleted zone around parent wells becomes more urgent and important. This understanding should include being able to predict the extent and heterogeneity of the depleted region near the pre-existing wells, the resulting altered stress field, and the effect of this on newly created fractures from adjacent child wells. In this paper we present a workflow that addresses the above concern in the Eagle Ford shale play, using numerical simulations of fracturing and reservoir flow, to define the effect of the depletion zone on child wells and match their field production data. We utilize an ultra-fast hydraulic fracture and depletion model to conduct several hundred numerical simulations, with varying values of permeability and surface area, seeking for cases that match the field production data. Multiple solutions exist that match the field data equally well, and we used additional field production data of parent-child well-interaction, to select the most plausible model. Results show that the depletion zone is strongly non-uniform and that large reservoir regions remain undepleted. We observe two important effects of the depleted zone on fractures from child wells drilled adjacent to the parents. Some fractures propagate towards low pressure zones and do not contribute to production. Others are repelled by the higher stress region that develops around the depletion zone, propagate into undepleted rock, and have production rates commensurate to that from other child wells drilled away from depleted region. The observations are validated by the field data. Results are being used to optimize well placement and well spacing for subsequent field operations, with the objective to increase the effectiveness of the child wells.