|Theme||Visible||Selectable||Appearance||Zoom Range (now: 0)|
Brinkley, Kourtney (Devon Energy) | Ingle, Trevor (Devon Energy) | Haffener, Jackson (Devon Energy) | Chapman, Philip (Devon Energy) | Baker, Scott (Devon Energy) | Hart, Eric (Devon Energy) | Haustveit, Kyle (Devon Energy) | Roberts, Jon (Devon Energy)
Abstract This case study details the use of Sealed Wellbore Pressure Monitoring (SWPM) to improve the characterization of fracture geometry and propagation during stimulation of inter-connected stacked pay in the South Texas Eagle Ford Shale. The SWPM workflow utilizes surface pressure gauges to detect hydraulically induced fracture arrivals athorizontal monitor locations adjacent to the stimulated wellbore (Haustveit et al. 2020). A stacked and staggered development in Dewitt County provided the opportunity to jointly evaluateprimary completion and recompletion efforts spanning three reservoir target intervals. Fivemonitor wells at varying distances across the unit were employed for SWPM during the stimulation of four wells. An operational overview, analysis of techniques, correlation with seismic attributes, image log interpretations, and fracture model calibration are provided. Outputs from this workflow allow for a refined analysis ofthe overall completion strategy. The high-density, five well monitor array recorded a total of 160 fracture arrivals at varying vertical and lateral distances, with far-field fracture arrivalsprovidingsignificant insight into propagation rates and geometry. Apronounced trend occurred in both arrival frequency and volumes pumped as monitor locations increased in distance from the treatment well. Specific to target zone isolation, it was identified that traversing vertically in section through a high stress interval yielded a 30% reduction inarrival frequency. An indirect relationship between horizontal distance and arrival frequency was also observed when monitoring from the same interval. A decrease in fracture arrivals from 70% down to 8% was realized as offset distance increased from 120 to 1,700 ft. The results from this study have proven to be instrumental in guiding interdisciplinary discussion. Assessing fracture geometry and propagation during stimulation, particularly in the co-development of a stacked pay reservoir, is paramount to the determination of proper completion volume, perforation design, and well spacing. Leveraging the observations of SWPM ultimately provides greater confidence in field development strategy and economic optimization.
Hui, Gang (University of Calgary, Alberta, Canada) | Chen, Shengnan (University of Calgary, Alberta, Canada) | Gu, Fei (PetroChina Research Institute of Petroleum Exploration and Development, Beijing, China)
Abstract The recent seismicity rate increase in Fox Creek is believed to be linked to the hydraulic fracturing operations near the region. However, the spatiotemporal evolution of hydraulic fracturing-induced seismicity is not well understood. Here, a coupled approach of geology, geomechanics, and hydrology is proposed to characterize the spatiotemporal evolution of hydraulic fracturing-induced seismicity. The seismogenic faults in the vicinity of stimulated wells are derived from the focal mechanisms of mainshock event and lineament features of induced events. In addition, the propagation of hydraulic fractures is simulated by using the PKN model, in combination with inferred fault, to characterize the possible well-fault hydrological communication. The original stress state of inferred fault is determined based on the geomechanics analysis. Based on the poroelasticity theory, the coupled flow-geomechanics simulation is finally conducted to quantitatively understand the fluid diffusion and poroelastic stress perturbation in response to hydraulic fracturing. A case study of a moment-magnitude-3.4 earthquake near Fox Creek is utilized to demonstrate the applicability of the coupled approach. It is shown that hydraulic fractures propagated along NE45° and connected with one North-south trending fault, causing the activation of fault and triggered the large magnitude event during fracturing operations. The barrier property of inferred fault under the strike-slip faulting regime constrains the nucleation position of induced seismicity within the injection layer. The combined changes of pore pressure and poroelastic stress caused the inferred fault to move towards the failure state and triggered the earthquake swarms. The associated spatiotemporal changes of Coulomb Failure Stress along the fault plane is well in line with the spatiotemporal pattern of induced seismicity in the studied case. Risks of seismic hazards could be reduced by decreasing fracturing job size during fracturing stimulations.
Rodríguez-Pradilla, Germán (School of Earth Sciences, University of Bristol, UK.) | Eaton, David (Department of Geoscience, University of Calgary, Canada.) | Popp, Melanie (geoLOGIC Systems Ltd., Calgary, Canada.)
Abstract The goal of this work is to calibrate a regional predictive model for maximum magnitude of seismic activity associated with hydraulic-fracturing in low-permeability formations in the Western Canada Sedimentary Basin (WCSB). Hydraulic fracturing data (i.e. total injected volume, injection rate, and pressure) were compiled from more than 40,000 hydraulic-fractured wells in the WCSB. These wells were drilled into more than 100 different formations over a 20-year period (January 1st, 2000 and January 1st, 2020). The total injected volume per unit area was calculated utilizing an area of 0.2° in longitude by 0.1° in latitude (or approximately 13x11km, somewhat larger than a standard township of 6x6 miles). This volume was then used to correlate with reported seismicity in the same unit areas. Collectively, within the 143 km area considered in this study, a correlation between the total injected volume and the maximum magnitude of seismic events was observed. Results are similar to the maximum-magnitude forecasting model proposed by A. McGarr (JGR, 2014) for seismic events induced by wastewater injection wells in central US. The McGarr method is also based on the total injected fluid per well (or per multiple nearby wells located in the same unit area). However, in some areas in the WCSB, lower injected fluid volumes than the McGarr model predicts were needed to induce seismic events of magnitude 3.0 or higher, although with a similar linear relation. The result of this work is the calculation of a calibration parameter for the McGarr model to better predict the magnitudes of seismic events associated with the injected volumes of hydraulic fracturing. This model can be used to predict induced seismicity in future unconventional hydraulic fracturing treatments and prevent large-magnitude seismic events from occurring. The rich dataset available from the WCSB allowed us to carry out a robust analysis of the influence of critical parameters (such as the total injected fluid) in the maximum magnitude of seismic events associated with the hydraulic-fracturing stimulation of unconventional wells. This analysis could be replicated for any other sedimentary basin with unconventional wells by compiling similar stimulation and earthquake data as in this study.
Abstract In multi-stage plug-and-perf horizontal well completions, there are a multitude of moving parts and variables to consider when evaluating performance drivers. Properly identifying performance drivers allows an operator to focus their efforts to maximize the rate of return of resource development. Typically, well-to-well comparisons are made to help identify performance drivers, but in many cases the differences are not clear. Identifying these drivers may require a better understanding of performance variability along a single lateral. Data analytics can help to identify performance drivers using existing data from development activities. In the case study below, multiple diagnostics are utilized to identify performance drivers. A combination of completion diagnostics including oil and water tracers, stimulation data, reservoir data, 3D seismic, and borehole image logs were collected on a set of wells in the early appraisal phase of a field. Using oil tracers as the best indication of stage level performance along the laterals, data analytics is applied to uncover the relationships between the tracers and the numerous diagnostics. After smoothing was applied to the dataset, trends between oil tracer recovery, several independent variables and features seen in image logs and 3D seismic were identified. All the analyses pointed to decreasing tracer recovery, and likely decreased oil production, near faulted areas along each lateral. A random forest model showed a moderate prediction power, where the model's predicted tracer recovery on blind stages was able to explain 54% of the variance seen in the tracer response (r=0.54). This analysis suggests the identification of certain faulted areas along the wellbore could lead to ways of improving individual well economics by adjusting completion design in these areas.
Abstract The objective of this study was to perform an integrated analysis to gain insight for optimizing fracturing treatment and gas recovery from Marcellus shale. The analysis involved all the available data from a Marcellus Shale horizontal well which included vertical and lateral well logs, hydraulic fracture treatment design, microseismic, production logging, and production data. A commercial fracturing software was utilized to predict the hydraulic fracture properties based on the available vertical and lateral well logs data, diagnostic fracture injection test (DFIT), fracture stimulation treatment data, and microseismic recordings during the fracturing treatment. The predicted hydraulic fracture properties were then used in a reservoir simulation model developed based on the Marcellus Shale properties to predict the production performance. In this study, the rock mechanical properties were estimated from the well log data. The minimum horizontal stress, instantaneous shut-in pressure (ISIP), process zone stress (PZS), and leak-off mechanism were determined from DFIT analysis. The stress conditions were then adjusted based on the results of microseismic interpretations. Subsequently, the results of the analyses were used in the fracturing software to predict the hydraulic fracture properties. Marcellus Shale properties and the predicted hydraulic fracture properties were used to develop a reservoir simulation model. Porosity, permeability, and the adsorption characteristics were estimated from the core plugs measurements and the well log data. The image logs were utilized to estimate the distribution of natural fractures (fissures). The relation between the formation permeability and the fracture conductivity and the net stress (geomechanical factors) were obtained from the core plugs measurements and published data. The predicted production performance was then compared against production history. The analysis of core data, image logs, and DFIT confirmed the presence of natural fractures in the reservoir. The formation properties and in-situ stress conditions were found to influence the hydraulic fracturing geometry. The hydraulic fracture properties are also impacted by stress shadowing and the net stress changes. The production logging tool results could not be directly related to the hydraulic fracture properties or natural fracture distribution. The inclusion of the stress shadowing, microseismic interpretations, and geomechanical factors provided a close agreement between the predicted production performance and the actual production performance of the well under study.
Abstract Monitoring and surveillance (M&S) is one of the key requisites for assessing the effectiveness and success of any Improved Oil Recovery (IOR) or Enhanced Oil Recovery (EOR) project. These projects can include waterflooding, gas flooding, chemical injection, or any other types. It will help understand, track, monitor and predict the injectant plume migration, flow paths, and breakthrough times. The M&S helps in quantifying the performance of the IOR/EOR project objectives. It provides a good understanding of the remaining oil saturation (ROS) and its distribution in the reservoir during and after the flood. A comprehensive and advanced monitoring and surveillance (M&S) program has to be developed for any given IOR/EOR project. The best practices of any such M&S program should include conventional, advanced and emerging novel technologies for wellbore and inter-well measurements. These include advanced time-lapse pulsed neutron, resistivity, diffusion logs, and bore-hole gravity measurements, cross-well geophysical measurements, water and gas tracers, geochemical, compositional and soil gas analyses, and 4D seismic and surface gravity measurements. The data obtained from the M&S program provide a better understanding of the reservoir dynamics and can be used to refine the reservoir simulation model and fine tune its parameters. This presentation reviews some proven best practices and draw examples from on-going projects and related novel technologies being deployed. We will then look at the new horizon for advanced M&S technologies.