In the past, much of the petrophysics done in the Australian mining industry has been based upon gamma ray, simple density devices, resistivity, and televiewers. Common uses of petrophysical data include locating the top and bottom of the seam/ore, determining the water level, mapping fractures and faults, computing hardness, and facies analysis. However, the industry is moving toward more advanced applications, such as improved methods of understanding the porosity and permeability of the rocks, 3D mapping of stability, and the use of petrophysical measurements as a cost-effective means of supplementing or even replacing traditional assay methods.
This paper begins with a brief introduction to the mining environment as compared with the modern oilfield environment. While petrophysical data acquisition in East Australian coal mines is not so far removed from shallow oilfield land wells, open pit mines, such as the Pilbara Iron Ore fields of Western Australia are a very different world - thousands of holes are drilled, each generally less than 60 metres. Assays (geological analysis of material collected from the hole) are the primary reference data. Costs to log are low and many processes (data interpretation, delivery of logs, etc.) are automated.
Next we will review how gamma ray, density, neutron, resistivity, and caliper measurements are used throughout the Australian mining industry, paying some attention to the challenges of using classic tool designs such as 16/64 normal resistivity tools and single point (uncompensated) density. Sonic, electrical imaging, and optical televiewers are the next tier of measurements, used for fracture/fault mapping, ground stability, hardness and seismic integration. Finally, we will discuss the latest wave of technologies to be gaining ground in the Australian mining market, including NMR, VSP, and elemental spectroscopy.
The introduction of advanced petrophysical measurements in Australian mining is opening the door for exploiting new applications, many centered around “big data” or machine learning techniques, such as automated facies identification, high resolution mapping of both major and minor minerals, and 3D visualisation of ore properties.
Summary Acquiring seismic data has typically been an expensive pursuit and acquisition systems are typically not easily adaptable to suit different acquisition scenarios. Data recorded using the system is comparable to that obtained using a far more expensive commercial seismograph. We aim to develop our design into an open-source seismograph that should enable seismic data to be acquired far more cheaply and thus frequently in the future. Introduction Acquiring seismic data has typically been an expensive pursuit. Although geophones are relatively cheap ( $20/element) the recording electronics are not.