By-pass pigging, as compared to normal pigging, reduces the pig-generated liquid slug. CFD (Computational Fluid Dynamics) was applied to understand the flow in and around the by-pass pig under both single phase and multiphase flow conditions. This can help to optimize the velocity of the pig and to define the proper operating envelop, that prevents that the pig gets stuck in the pipeline. Three levels of modeling have been investigated, namely: analytical (i.e. single point multiphase flow correlations), 1D (i.e. using the dynamic pipeline simulator OLGA) and 2D/3D CFD (using Fluent). In the CFD analysis a 2D axis-symmetric model for the single phase flow through the by-pass area is created. Furthermore, CFD simulations were carried out for the multiphase flow in a 2D channel to investigate the mechanism of the reduction in pig-generated volume. The multiphase flow results show four zones in which the flow downstream of the pig can be classified.
Offshore gas-condensate trunklines normally end in a large onshore slugcatcher. This slugcatcher can be as large as 5000 m3, and is meant to both separate the gas and condensate (and water) and to temporarily store liquid slugs. New projects (with longer pipeline lengths and with larger pipe diameters) can require even larger slugcatchers (e.g. 8000 to 10000 m3). The presence of a large slugcatcher will guarantee the continuous supply of gas to the downstream gas plant. The available literature on by-pass pigging is limited. Out  solved the problem of a slug of liquid between two sealing pigs in an isothermal 1-D flow field by using a standard numerical scheme with equally expanded grid intervals behind the pig. Minami and Shoham  used a mixed Eulerian-Lagrangian approach in the solution of the transient two-phase gas/slug system.
In this study, the occurrence of multiple solutions in stratified flows was investigated. The model equations give multiple holdup solutions for certain flow regimes – in small angle upflows with low liquid velocity (low liquid loading) and with low to moderate gas velocity. We applied a steady state as well as a transient flow model, supplied with different closures, verifying the structural stability of different solutions. We compared our model results to observations in our own experiments for zero net liquid flow, and also with two experimental cases by other authors, who investigated the occurrence of hysteresis or holdup discontinuities in stratified flows.
Long gas/condensate pipelines follow the natural terrain and thus have an undulating profile. Since they operate in the low liquid loading regime, the flow pattern is predominantly stratified flow. In those parts of the pipeline which are slightly upwardly inclined, a steep change in holdup can be observed when the gas velocity is decreased. Under these same conditions, the standard stratified two-phase flow models predict the occurrence of multiple holdup solutions. It is our goal to investigate if we can reliably predict which holdup solution is going to happen in reality, and at which conditions the sudden change in holdup will take place. One of the first studies to point out the occurrence of multiple solutions under certain conditions in the original two-phase stratified flow model presented by Taitel and Dukler (1) was done by Baker and Gravestock (2). Landman (3, 4) and Ullmann et al. (5) showed that this was also the case when laminar gas/liquid flow in rectangular ducts was solved exactly. Further, Landman (3, 4) parameterized the multi-valued solutions, and did a stability analysis and dynamic simulations in order to see which of the solutions is likely to happen in reality.