|Theme||Visible||Selectable||Appearance||Zoom Range (now: 0)|
Suarez-Rivera, Roberto (W. D. Von Gonten Laboratories) | Panse, Rohit (W. D. Von Gonten Laboratories) | Sovizi, Javad (Baker Hughes) | Dontsov, Egor (ResFrac Corporation) | LaReau, Heather (BP America Production Company, BPx Energy Inc.) | Suter, Kirke (BP America Production Company, BPx Energy Inc.) | Blose, Matthew (BP America Production Company, BPx Energy Inc.) | Hailu, Thomas (BP America Production Company, BPx Energy Inc.) | Koontz, Kyle (BP America Production Company, BPx Energy Inc.)
Abstract Predicting fracture behavior is important for well placement design and for optimizing multi-well development production. This requires the use of fracturing models that are calibrated to represent field measurements. However, because hydraulic fracture models include complex physics and uncertainties and have many variables defining these, the problem of calibrating modeling results with field responses is ill-posed. There are more model variables than can be changed than field observations to constrain these. It is always possible to find a calibrated model that reproduces the field data. However, the model is not unique and multiple matching solutions exist. The objective and scope of this work is to define a workflow for constraining these solutions and obtaining a more representative model for forecasting and optimization. We used field data from a multi-pad project in the Delaware play, with actual pump schedules, frac sequence, and time delays as used in the field, for all stages and all wells. We constructed a hydraulic fracturing model using high-confidence rock properties data and calibrated the model to field stimulation treatment data varying the two model variables with highest uncertainty: tectonic strain and average leak-off coefficient, while keeping all other model variables fixed. By reducing the number of adjusting model variables for calibration, we significantly lower the potential for over-fitting. Using an ultra-fast hydraulic fracturing simulator, we solved a global optimization problem to minimize the mismatch between the ISIPs and treatment pressures measured in the field and simulated by the model, for all the stages and all wells. This workflow helps us match the dominant ISIP trends in the field data and delivers higher confidence predictions in the regional stress. However, the uncertainty in the fracture geometry is still large. We also compared these results with traditional workflows that rely on selecting representative stages for calibration to field data. Results show that our workflow defines a better global optimum that best represents the behavior of all stages on all wells, and allows us to provide higher-confidence predictions of fracturing results for subsequent pads. We then used this higher confidence model to conduct sensitivity analysis for improving the well placement in subsequent pads and compared the results of the model predictions with the actual pad results.
Dontsov, Egor (ResFrac Corporation) | Suarez-Rivera, Roberto (W. D. Von Gonten Laboratories) | Panse, Rohit (W. D. Von Gonten Laboratories) | Quinn, Christopher (W. D. Von Gonten Laboratories) | LaReau, Heather (BP America Production Company, BPx Energy Inc.) | Suter, Kirke (BP America Production Company, BPx Energy Inc.) | Hines, Chris (BP America Production Company, BPx Energy Inc.) | Montgomery, Ryan (BP America Production Company, BPx Energy Inc.) | Koontz, Kyle (BP America Production Company, BPx Energy Inc.)
Abstract As the number of wells drilled in regions with existing producing wells increases, understanding the detrimental impact of these by the depleted zone around parent wells becomes more urgent and important. This understanding should include being able to predict the extent and heterogeneity of the depleted region near the pre-existing wells, the resulting altered stress field, and the effect of this on newly created fractures from adjacent child wells. In this paper we present a workflow that addresses the above concern in the Eagle Ford shale play, using numerical simulations of fracturing and reservoir flow, to define the effect of the depletion zone on child wells and match their field production data. We utilize an ultra-fast hydraulic fracture and depletion model to conduct several hundred numerical simulations, with varying values of permeability and surface area, seeking for cases that match the field production data. Multiple solutions exist that match the field data equally well, and we used additional field production data of parent-child well-interaction, to select the most plausible model. Results show that the depletion zone is strongly non-uniform and that large reservoir regions remain undepleted. We observe two important effects of the depleted zone on fractures from child wells drilled adjacent to the parents. Some fractures propagate towards low pressure zones and do not contribute to production. Others are repelled by the higher stress region that develops around the depletion zone, propagate into undepleted rock, and have production rates commensurate to that from other child wells drilled away from depleted region. The observations are validated by the field data. Results are being used to optimize well placement and well spacing for subsequent field operations, with the objective to increase the effectiveness of the child wells.