Al-Kandary, Ahmad (Kuwait Oil Company) | Al-Fares, Abdulaziz (Kuwait Oil Company) | Mulyono, Rinaldi (Kuwait Oil Company) | Ammar, Nada Mohammed (Kuwait Oil Company) | Al naeimi, Reem (Baker Hughes) | Hussain, Riyasat (Kuwait Oil Company) | Perumalla, Satya (Baker Hughes)
Role of geomechanics is becoming increasingly important with maturing of conventional reservoirs due to its implications in drilling, completion and production issues. Exploration and development of unconventional reservoirs involve maximizing the reservoir contact and hydraulic fracturing both of which are heavily dependent on geomechanical architecture of the reservoirs and thus require application of geomechanical concepts from the very beginning.
To support the unconventional exploration and conventional reservoir development in Kuwait, country-wide in-situ stress mapping exercise has been carried out in nine fields of Northern Kuwait. Stringent customized quality control measures were put in place to evaluate stress orientation. Cretaceous and sub-Gotnia Salt Jurassic rocks exhibit distinct patterns of stress orientations and magnitudes. While the variations in stress orientation in the Cretaceous rocks are within a small range (N40°E-N50°E) and consistent across major fault systems, the Jurassic formations exhibit high variability (N20°E-N90°E) with anomalous patterns across faults as well as in the vicinity of fracture corridors. Moreover, the overall stress magnitudes were found to be much higher in the strong Jurassic section compared with the relatively less strong Cretaceous strata. During the analysis, it was also observed that several natural fractures in Jurassic reservoirs appear to be critically stressed with evidences of rotation of breakouts.
Using geomechanical models from a specific field, the effects of in-situ stress, pore pressure and rock properties on formations were evaluated in inducing wellbore instability during drilling operations in a tight gas reservoir. It was found that the most favorable orientation for directional drilling is parallel to the maximum horizontal stress (SHmax) within that field.
The geomechanical study provided inputs not only for wellbore stability during drilling, but also regarding the response of natural fractures to in-situ stresses to become hydraulically conductive (permeable) to act as flow conduits. The fracture model of the field shows that the dominant fracture corridor trend in the field is NNE coinciding with present day in-situ maximum principal stress direction.
Influenced by the success of shale gas production worldwide and to meet requirements for clean energy supply, a multidisciplinary team of petroleum specialists was established in Saudi Aramco. Meeting the growing requirement in industrial consumption and especially electricity production is driving force for developing unconventional gas reserves. "The initial focus is in the northwest and in the area of Ghawar, where gas infrastructure exists. Initial knowledge building from similar plays in North America is being supplemented with internal technical studies and research programs to help solve geological and engineering challenges unique to Saudi Arabia and to locate specific wells planned for 2011. The company is innovatively combining knowledge and research to maximize gas reserves and production from conventional and unconventional resources in order to meet growing domestic demand.?? 
During years 2010 - 2011 major international petroleum industry players - Schlumberger, Halliburton and Baker Hughes - were invited to share their experience in a series of workshops held in Dhahran. Exchange of expert ideas developed into appreciation of complexity of the shale gas reservoir and helped to identify the scope of work for the first Silurian Qusaiba shale gas well. The SHALE-1 well was drilled in 2007 as a gas exploration well. Recent drilling and geophysical data obtained in the well were beneficial for detailed sidetrack and fracture stimulation design.
The Multidisciplinary Saudi Aramco - Halliburton SHALE-1 task group was established and positioned in Dhahran. This allowed them to have regular face-to-face meetings and improve the most critical criteria of any new venture - communication. The draft work plan was developed 8 months before actual operations commenced on the well site. Thorough examination of the draft work plan progressed to the final work plan with a number of improvements. For example, "R?? Nipples were dropped from the monobore 4-1/2?? completion string. The Frac Stimulation design was fine-tuned, involving expertise from Saudi Aramco and Halliburton. The Complete Well on Paper exercise involved over 25 specialists from both sides and helped to rectify remaining completion/stimulation design issues, and put everyone on the same page in terms of the work program. Well site operations commenced in May 2011; the well was successfully re-entered and window cut in 7?? liner. An S-shaped 5-7/8?? hole was drilled in the direction of minimum horizontal stresses, to the required depth in Qusaiba Shale with a maximum DLS of 4°. The well was completed with 4-1/2?? cemented liner and monobore 4-1/2?? string to surface. The Hot Qusaiba interval was perforated; frac stimulated with mixed results and successfully flowed. A temporary isolation FasDrill plug was set above the perforation interval. The Warm Qusaiba interval was perforated; successfully frac stimulated and flowed with mixed results. Finally, the FasDrill plug was drilled out with CTU and both intervals flowed and required production log runs.
All targets set for the SHALE-1 re-entry well were successfully achieved and the well was suspended for future utilization as an observation well.
Fracture ballooning usually occurs in naturally fractured reservoirs and is often mistakenly regarded as an influx of formation fluid, which may lead to misdiagnosed results in costly operations. In order to treat this phenomenon and to distinguish it from conventional losses or kicks, several mechanisms and models have been developed. Among these mechanisms under which borehole ballooning in naturally fractured reservoirs take place, opening/closing of natural fractures plays a dominant role. In this study a mathematical model is developed for mud invasion through an arbitrarily inclined, deformable, rectangular fracture with a limited extension. A governing equation is derived based on equations of change and lubrication approximation theory (Reynolds’s Equation). The equation is then solved numerically using finite difference method. Considering an exponential pressure-aperture deformation law and a yield-power-law fluid rheology has made this model more general and much closer to the reality than the previous ones. Describing fluid rheology with yield-power-law model makes the governing equation a versatile model because it includes various types of drilling mud rheology, i.e., Newtonian fluids, Bingham-plastic fluids, power-law, and yield-power-law rheological models. Sensitivity analysis on some parameters related to the physical properties of the fracture shows how fracture extension, aspect ratio and length, and location of wellbore can influence fracture ballooning. The proposed model can also be useful for minimizing the amount of mud loss by understanding the effect of fracture mechanical parameters on the ballooning, and for predicting rate of mud loss at different formation pressures.
Transverse fractures created from horizontal wells are a common choice in tight and shale gas reservoirs. Previous work has shown that proppant pack permeability reduction due to non-Darcy flow in a transverse fracture from a horizontal well causes significant reduction in the fracture performance when the gas formation permeability exceeds 0.5 md. There are other configurations and architectures such as aligning the well trajectory with the fracture, either by drilling horizontal wells in the direction that results in longitudinal fractures or by just sticking with drilling vertical wells. However, when drilling and fracturing costs are considered, productivity is not the only optimization consideration.
The field example illustrates a case when the apparent choice to use transverse fractures from horizontal wells proved to be suboptimal from the productivity perspective, but fundamental considering economics. Parametric studies for permeability ranging from 0.01 to 5 md illustrate the importance of economics in addition to physical performance. For similar reservoir characteristics, the optimum fractured well architecture varies considerably, and therefore an extensive reservoir engineering approach may be necessary beyond the well completions and/or current prejudices and inadequate understanding.
The reliability of the estimated parameters in well test analysis depends on the accuracy of measured data. Early time data are usually controlled by the wellbore storage effect. However, this effect may last for the pseudo-radial flow or the boundary dominated flow. Eliminating this effect is an option for restoring the real data. Using the data with this effect is another option that can be used successfully for reservoir characterization.
This paper introduces a new technique for interpreting the pressure behavior of horizontal wells and fractured formations with wellbore storage. A new analytical model describes the early time data has been derived for both horizontal wells and horizontal wells intersecting multiple hydraulic fractures. Several models for the relationships of the peak points with the pressure, pressure derivative and time have been proposed in this study for different wellbore storage coefficients. A complete set of type curves has been included for different wellbore lengths, skin factors and wellbore storage coefficients. The study has shown that early radial flow for short to moderate horizontal wells is the most affected flow regime by the wellbore storage. For long horizontal wells, the early linear flow is the most affected flow regime by the wellbore storage effect.
The most important finding in this study is the ability to run a short test and use the early time data only for characterizing the formation. This means there is no need to run a long time test to reach the pseudo-steady state. Therefore, from the wellbore storage dominated flow, the early radial and pseudo-radial flow can be established for horizontal wells and hydraulic fractured formations. A step-by-step procedure for analyzing pressure tests using the analytical models (TDS) and the type curves is also included in this paper for several numerical examples.
The matrix blocks in fractured reservoirs are the primary storage of hydrocarbons, so matrix-fracture transfer mechanisms are of crucial importance in recovery from fractured reservoirs. During gas injection into fractured reservoirs, fractures are filled with injected gas while matrix blocks contain the reservoir fluid. In this condition due to compositional difference between the gas in fractures and the fluid in matrix, diffusive exchanges of components between matrix and fracture may have significant contribution on matrix oil recovery in addition to gravity drainage or other transfer mechanisms.
In this work, to evaluate the significance of molecular diffusion, the laboratory experiment of "Gas Injection into Fractured cores?? is simulated using a compositional model and this model is used to run several experiments which help in understanding the way that each recovery mechanism acts. The advantage of running simulation in core scale is that in this way there is the possibility of using small grid size which significantly reduces the issues of numerical dispersion. And more over the existing experimental data can be used for model adjustment. In the experimental works the procedure is to place a core sample into a core holder in such a way that the annulus space between the core boundary and the core holder is very small. This annulus space is representative of the fracture surrounding the matrix blocks in the reservoir. Then after using special techniques the core is saturated with the representative reservoir oil, and after this primary core initialization, gas is injected into the annulus and the amount of recovered oil is measured versus time.
This study reveals that, molecular diffusion acts like a catalyst and improves the recovery mechanism by enhancing the gas movement within matrix. At the prevalent conditions of this work, the main recovery mechanisms are the miscibility effects (Condensing or Vaporizing gas drives) that are enhanced by molecular diffusion. Sensitivity analysis done in this work reveals that significance and contribution of molecular diffusion in recovery changes with different parameters such as matrix permeability and porosity, gas composition, etc.
Fractured reservoirs contain a significant portion of the world's reserves, and Gas injection is a common recovery practice in these reservoirs and understanding the recovery mechanisms is of crucial importance for correct simulation of this process. This study shows, although significance of molecular diffusion changes with reservoir parameters, any way neglecting it in simulation studies will result in underestimation of gas injection efficiency.
Turkey, Laila (KOC) | Hafez, Karam Mohamed (KOC) | Vigier, Louise (Beicip) | Chimmalgi, Vishvanath Shivappa (Kuwait Oil Company) | Dashti, Hameeda Hussain (Kuwait Oil Company) | Datta, Kalyanbrata (KOC) | Knight, Roger (KOC) | Lefebvre, Christian (Beicip-Franlab) | Bond, Deryck John (Kuwait Oil Company) | Al-qattan, Abrar (KOC) | Al-Jadi, Manayer (Kuwait Oil Company) | De Medeiros, Maitre (Beicip) | Al-Kandari, Ibrahim (Kuwait Oil Company)
A pilot water flood was carried out in the Marrat reservoir in the Magwa Field. The main aim of this pilot was to allow an assessment of the ability to sustain injection, better understand reservoir characteristics. A sector model was built to help with this task.
An evaluation of the injectivity in Magwa Marrat reservoir was performed with particular attention to studying how injectivity varied as injected water quality was changed. This was done using modified Hall Plots, injection logs, flow logs and time lapse temperature logs.
Data acquisition during the course of the pilot was used to better understand reservoir heterogeneity. This included the acquisition of pressure transient and interference data, multiple production and injection logs, temperature logging, monitoring production water chemistry, the use of tracers and a re-evaluation of the log and core data to better understand to role of fractures.
A geological model using detailed reservoir characterization and a 3D discrete fracture network model was constructed. Fracture corridors were derived from fractured lineaments interpreted from different seismic attribute maps:
A sector model of the pilot flood area was then derived and used to integrate the results of the surveillance data. The main output is to develop an understanding of the natural fracture system occurring in the different units of the Marrat reservoir and to characterize their organization and distribution. The lessons learned from this sector modeling work will then be integrated in the Marrat full field study.
The work described here shows how pilot water flood results can be used to reduce risk related to both injectivity and to reservoir heterogeneity in the secondary development of a major reservoir.
Al Hamad, Abdullah (Halliburton) | Abdul-Razaq, Eman (KOC) | Al Bahrani, Hasan (KOC) | Surjaatmadja, Jim Basuki (Halliburton) | Bouland, Ali (Kuwait Oil Company) | Turkey, Naween (KOC) | Brand, Shannon (Halliburton) | Al-Saqabi, Mishari Bader (Kuwait Oil Company) | Al-Zankawi, Omran (Kuwait Oil Company) | Vishwanath, Chimmalgi (KOC) | Gazi, Naz H. (Kuwait Oil Company)
There are many ways to stimulate an unlined openhole horizontal well using acid. The simplest way is to just pump acid into the well (i.e., bullhead) without placement control. However, this can often be ineffective. Although still used, such approaches can create massive enlargements at the entry point or high injectivity area, thus causing ineffective treatments and re-entry issues. Wellbore collapse often follows. The use of coiled tubing (CT) as a "pin-point?? delivery method is therefore preferred. Using CT allows dispersal of the acid either uniformly or intermittently along the lateral, as desired. CT also allows acid washing to be performed, which is another common process that can improve stimulation without much additional expense to the operator. Using a jetting tool with many jets, acid can be sprayed onto the wellbore wall, and the active agitation caused by the acid-wash process increases the chemical reactivity of the acid at the desired locations.
Another beneficial approach of using CT is the hydrajet assisted acid fracturing (HJAAF) method. With focused jetting of acid at much higher pressures, the process initiates microfractures in the wellbore walls. When etched with acid, this approach effectively bypasses near-wellbore (NWB) damage much deeper than common washes, thus providing much better results. Further modification of the process by exerting high annular pressures offers the capability of delivering medium to large fractures.
This paper discusses two HJAAF processes uniquely combined into one process used in two large horizontal wells. Because of the large dimension of the inner diameter (ID) of the wells combined with the small production tubing the tool must pass through, the implementation had to be further improved by using a unique jetting mechanism, which positioned the jet nozzles closer to the target. Actual results of such stimulations are presented.
Whole level of the erosion and the resistance of rocks which were composed closured have been studied, besides, the impact of temperature and laser irradiation for more investigation about this issue has been involved before all. This subject more reveals the matter which laser absorption on the laboratory scale using laser to what extent can cause the augment of the relative permeability and secondary porosity of reservoir rock, that of the vertical and horizontal useful connectivity and eventually that of the positive transferability.
This research has been carried out in the form of case study on one of Iranian south west formations in north east of Behbahan city in Iran, either the rate or generation of forming the subtle and large fractures has been studied by considering and preparing this section from rocks of stratified sequence of the laboratory area before and after the laser irradiation operation and various analyzer by the means of Spectrophotometer and advanced electron microscope. It should be noted that during the erosion and ablation in the laser drilling operation in the experimental rocks of considered field, given the capability of the field, the formation and field lithology we observed the creation of fractures at the level of micro and nano simultaneously whose vacant spaces were positive, and reservoir and some others were neutral, this fractures can be created by the rate of crude oil absorption. The main purpose of this study is to advance the operations towards the higher technology in order to the better efficiency in the field of the well completion to be gained improving the rate of oil production by the introduction of this modern method of improving and fracturing reservoir which uses certain specialized parameters and indicators, and, finally, the certain method that might be a better way to use laser irradiation on our chosen formation of Iran.
Widening supply and demand gap in natural gas industry, the advent of tight gas policy and increasing interest of operators in tight gas sands and shale has opened new venues for development of unconventional plays in Pakistan.
Middle Indus Basin hosts important gas fields of Pakistan. Most of the wells in this basin are completed in conventional lower Goru Sands. Lower Goru formation consists of inter-bedded sequences of sands and shale. Its unconventional sand and shale plays hold immense potential which has not yet been exploited due to lack of technology and promising economics. Moreover, Sembar shale is the well known source rock in this basin holding large shale gas potential. GIIP estimates for Lower Goru tight sands excluding the shale prospects are 8.4 TCF which are considered pessimistic due to lack of data in many fields.
From the currently suspended or abandoned wellbores of the Middle Indus Basin, a pilot project needs to be defined in each of the fields, to prove the technical and economical feasibility of tight Gas Potential of the Basin. Commencement of production from unconventional sands will enhance the production in a cost effective manner due to availability of infrastructure and facilities.
This paper focuses on the utilization of existing wellbores as well as data set and highlighting additional data acquisition requirements coupled with completion and multi-stage fracturing techniques for designing a pilot project. Case study of a pilot project in one of the fields of this basin is discussed. It encompasses the basic workflow, candidate selection criterion, Geo-mechanics, sector modeling, hydraulic fracture design and risk evaluation coupled with its use in full field development projects.
Background and Introduction
Pakistan's last year 2010-2011 production was about 3.91bcf/d, while its demand was (4.2bcf/d) and supply gap was also started. Since then the production from the conventional fields has decreased, while demand has been increased due to infrastructure and human needs. This huge shortfall in the gas market cannot be fulfilled with existing number of completions/producers. The conventional reserves of the country were 56 TCF out of which the country has already produced 50% of its conventional reserves. The recoverable remaining reserves are 24-28TCF, but will be produced at much lower production rate and in much longer period of time. The country has an infrastructure of Gas Processing Facilities 5bcf/d.