Tinni, Ali (University of Oklahoma) | Fathi, Ebrahim (Univ of Oklahoma) | Agarwal, Rajiv (University of Oklahoma MPGE) | Sondergeld, Carl H. (University of Oklahoma) | Akkutlu, I. Yucel (University of Oklahoma MPGE) | Rai, Chandra Shekhar (University of Oklahoma)
The economic viability of a shale play is strongly dependent on permeability which is often on the order of nanodarcies. Permeabilities are measured on core plugs or crushed samples using unsteady state techniques. However, the resultant permeabilities are the sources of controversy, because of the inconsistency in the permeability values produced with different techniques and different laboratories. In this research we evaluated the experimental factors which could influence permeability measurements with the GRI technique, and also present some permeability measurements on shale plugs.
To evaluate the GRI permeability measurement technique on crushed rock, we investigated the effect of particle size, sieving of the crushed samples, pore pressure, different gases, and initial state of the measurement apparatus. The measured crushed shale permeabilities display a dependency on all these parameters. However, the particle size and the pore pressure appear to be the more important factors. This makes the reported values strongly dependent on the exact measurement procedure. This study was complemented by the imaging of crushed shale samples with a micro-CT scanner. These images showed the presence of microcracks even in samples as small as the recommended GRI particle size (~0.7mm).
The permeabilities of several Devonian and Ordovician age shale plugs were measured with a pressure build up technique using nitrogen as flowing gas. A permeability decrease by an order of magnitude was generally observed for the Ordovician shale plugs with an increase of confining pressure from 1000 to 5000 psi. For the same Ordovician shale, the permeability anisotropy was found to be close to 2 orders of magnitude.The permeability of the Devonian shale plugs decreased by a maximum of 3 orders of magnitude over the range of confining pressure. For most shales, the confining pressure dependency of permeability is driven by cracks which is confirmed by a fit to Walsh's crack permeability model. However, we also noticed that it is possible to close the cracks contained in some plugs and obtain a value more representative of matrix permeability.