This paper focuses on the design, the operation and the laboratory work needed for performing a successfull Single Well Tracer Test (SWTT) campaign in the Handil mature field Indonesia. Three tests have been performed in different waterflooded reservoirs to assess the repartition of Remaining Oil Saturation (ROS) in the field.
An extensive laboratory work has been performed prior to tests to screen chemicals that could be used and then to measure the two main parameters needed for the design of the tests: the partitioning coefficient of the primary tracer between water and oil (Kd) and the hydrolysis reaction rate (kH) of the primary tracer into the water. Measurements were performed at reservoir temperature and pressure conditions using recombined live oil sample and recombined brine with respect to the salinity of each reservoir. Results indicate very low discrepancy of Kd value between reservoirs (4 to 5), while kH show a strong linear dependency with salinity (from 0.12 to 0.45 day-1). To take into account the presence of trapped gas saturation, we measured also the partitioning coefficient of AcOET between the water and the gas phase at reservoir pressure and temperature. As expected the Kd water/gas was low compare to the water/oil with a value of 0.5.
Tests were performed in parallel after the installation and the calibration of laboratory equipments and the commissionning of the injection barge. The tracer profiles quality recorded from the three tests was very good with high tracer recovery and low scattering data. However the interpretation was challenging, and numerical simulation was necessary to handle non ideal phenomenan occurring during these tests and to get reliable ROS estimation. The ROS values range between 20-30% which allows moving forward in the identification of potential EOR reservoir candidates and locations of future pilot zones for the more promising EOR processes.