Al-Kandary, Ahmad (Kuwait Oil Company) | Al-Fares, Abdulaziz (Kuwait Oil Company) | Mulyono, Rinaldi (Kuwait Oil Company) | Ammar, Nada Mohammed (Kuwait Oil Company) | Al naeimi, Reem (Baker Hughes) | Hussain, Riyasat (Kuwait Oil Company) | Perumalla, Satya (Baker Hughes)
Role of geomechanics is becoming increasingly important with maturing of conventional reservoirs due to its implications in drilling, completion and production issues. Exploration and development of unconventional reservoirs involve maximizing the reservoir contact and hydraulic fracturing both of which are heavily dependent on geomechanical architecture of the reservoirs and thus require application of geomechanical concepts from the very beginning.
To support the unconventional exploration and conventional reservoir development in Kuwait, country-wide in-situ stress mapping exercise has been carried out in nine fields of Northern Kuwait. Stringent customized quality control measures were put in place to evaluate stress orientation. Cretaceous and sub-Gotnia Salt Jurassic rocks exhibit distinct patterns of stress orientations and magnitudes. While the variations in stress orientation in the Cretaceous rocks are within a small range (N40°E-N50°E) and consistent across major fault systems, the Jurassic formations exhibit high variability (N20°E-N90°E) with anomalous patterns across faults as well as in the vicinity of fracture corridors. Moreover, the overall stress magnitudes were found to be much higher in the strong Jurassic section compared with the relatively less strong Cretaceous strata. During the analysis, it was also observed that several natural fractures in Jurassic reservoirs appear to be critically stressed with evidences of rotation of breakouts.
Using geomechanical models from a specific field, the effects of in-situ stress, pore pressure and rock properties on formations were evaluated in inducing wellbore instability during drilling operations in a tight gas reservoir. It was found that the most favorable orientation for directional drilling is parallel to the maximum horizontal stress (SHmax) within that field.
The geomechanical study provided inputs not only for wellbore stability during drilling, but also regarding the response of natural fractures to in-situ stresses to become hydraulically conductive (permeable) to act as flow conduits. The fracture model of the field shows that the dominant fracture corridor trend in the field is NNE coinciding with present day in-situ maximum principal stress direction.
The need to develop new tools that allow reservoir engineers to optimize reservoir performance is becoming more demanding by the day. One of the most challenging and influential problems facing reservoir engineers is well placement optimization.
The North Kuwait field (NKF) consists of six fields containing four naturally fractured carbonate formations. The reservoirs are composed of relatively tight limestone and dolomite embedded with anhydrate and shale. The fields are divided into isolated compartments based on fault zones and supported by a combination of different fluid compositions, initial pressures, and estimated free-water levels. Due to natural complexity, tightness, and high drilling costs of wells in the NKF, it is very important to identify the sweet spots and the optimum well locations.
This paper presents two intelligent methods that use dynamic numerical simulation model results and static reservoir properties to identify zones with a high-production potential: reservoir opportunity index (ROI) and simulation opportunity index (SOI). The Petrel* E&P software platform was chosen as the integrated platform to implement the workflow. The fit-for-purpose time dependent 2D maps generated by the Petrel platform facilitated the decision-making process used for locating new wells in the dominant flow system and provided immense support for field-development plans.
The difference between the two methods is insignificant because of reservoir tightness, limited interference, and natural uncertainty on compartmentalization. At this stage, pressure is not a key parameter. As a result, unlike brown fields, less weight was given to simulated pressure, and SOI was used to select the well locations.
The results of this study show that implementing these workflows and obtaining the resulting maps significantly improve the selection process to identify the most productive areas and layers in a field. Also, the optimum numbers of wells using this method obtained in less time and with fewer resources are compared with results using traditional industry approaches.
Gomez, Ernest (Schlumberger) | Al-Faresi, Fahad A. Rahman (Kuwait Oil Company) | Belobraydic, Matthew Louis (Schlumberger) | Yaser, Muhammad (Schlumberger) | Gurpinar, Omer M. (Schlumberger) | Wang, James Tak Ming (Schlumberger) | Husain, Riyasat (Kuwait Oil Company) | Clark, William (Schlumberger) | Al-Sahlan, Ghaida Abdullah (Kuwait Oil Company) | Datta, Kalyanbrata (KOC) | Mudavakkat, Anandan (KOC) | Bond, Deryck John (Kuwait Oil Company) | Crittenden, Stephen J. (KOC) | Iwere, Fabian Oritsebemigho (Schlumberger) | Hayat, Laila (KOC) | Prakash, Anand (KOC)
The Burgan Minagish reservoir in the Greater Burgan Field is one of several reservoirs producing from the Minagish formation in Kuwait and the Divided Zone. The reservoir has been produced intermittently since the 1960s under natural depletion. A powered water-flood is currently being planned. The pressure performance of the reservoir has proved hard to explain without invoking communication with other reservoirs. Such communication could be either with other reservoirs through the regional aquifer of through faults to other reservoirs in the Greater Burgan field. Recent pressures are close to the bubble point.
A coarse simulation model of the nearby fields and the regional aquifer was constructed based on data from the fields and regional geological understanding. This model could be history matched to allow all regional pressure data to be broadly matched, a result which supports the view that communication is through the regional aquifer. Using this model to predict future pressure performance suggested that injecting at rates that exceeded voidage replacement by about 50 Mbd could keep reservoir pressure above bubble point. It was recognized that the process of history matching performance was non-unique. This is a particular concern in the context of this study because the model inputs that were varied in the history matching process included aquifer data that was very poorly constrained. To address this problem multiple history matched models were created using an assisted history matching tool. Using prediction results from the range of models has increased our confidence that a modest degree of over-injection can help maintain reservoir pressure.
This paper demonstrates the utility of computer assisted history match tools in allowing an assessment of uncertainty in a case where non-uniqueness was a particular problem. It also emphasizes the importance of understanding aquifer communication when relatively closely spaced fields are being developed.
Sanyal, Tirtharenu (Kuwait Oil Company) | Al-Hamad, Khairyah (KOC) | Jain, Anil Kumar (KOC) | Al-Haddad, Ali Abbas (KISR) | Kholosy, Sohib (KISR) | Ali, Mohammad A.J. (Kuwait Inst. Scientific Rsch.) | Abu Sennah, Heba Farag (Kuwait Oil Company)
Improved oil recovery for heavy oil reservoirs is becoming a new research study for Kuwaiti reservoirs. There are two mechanisms for improved oil recovery by thermal methods. The first method is to heat the oil to higher temperatures, and thereby, decrease its viscosity for improved mobility. The second mechanism is similar to water flooding, in which oil is displaced to the production wells. While more steam is needed for this method than for the cyclic method, it is typically more effective at recovering a larger portion of the oil.
Steam injection heats up the oil and reduce its viscosity for better mobility and higher sweep efficiency. During this process, the velocity of the moving oil increases with lower viscosity oil; and thus, the heated zone around the injection well will have high velocity. The increase of velocity in an unconsolidated formation is usually accompanied with sand movement in the reservoir creating a potential problem.
The objective of this study was to understand the effect of flowrate and viscosity on sand production in heavy oil reservoir that is subjected for thermal recovery process. The results would be useful for designing completion under steam injection where the viscosity of the oil is expected to change due to thermal operations.
A total of 21 representative core samples were selected from different wells in Kuwait. A reservoir condition core flooding system was used to flow oil into the core plugs and to examine sand production. Initially, the baseline liquid permeability was measured with low viscosity oil and low flowrate. Then, the flowrate was increased gradually and monitored to establish the value for sand movement for each plug sample. At the end of the test, the produced oil containing sand was filtered for sand content.
The result showed that sand production increased with higher viscosity oil and high flowrate. However, sand compaction at the injection face of the cores was more significant than sand production. In addition, high confining pressure contributes to additional sand production. The average critical velocity was estimated ranged from 18 to 257 ft/day for the 0.74 cp oil, 2 to 121 ft/day for the 16 cp oil, and 1 to 26 ft/day for the 684 cp oil.
Currently, many reservoirs in the region approach the end of primary recovery phase where new techniques are needed to enhance recovery. Therefore, the need to optimize oil recovery from the current resources is very well understood by regional oil companies. To enhance oil recovery from current oil resources, field operators need to overcome the forces responsible for oil entrapment. Enhanced Oil Recovery techniques (EOR) introduce new energy into oil reservoirs to reduce the influence of these forces. Most of these resources contain light oil and are considered suitable candidates for either miscible or chemical EOR techniques. The first technique is challenged by the availability of suitable miscible gas. While, chemical EOR techniques are challenges by the high salt concentrations in the maturing oil reservoirs. The high salinity conditions encourage deficiencies in the performance of chemical EOR processes. Therefore, minimizing the effect of in situ salt on the injected chemical would impose tremendous improvement that leads to higher oil recovery. One way to diminish salt effect is to condition the oil reservoirs by injecting a slug of preflush water prior to chemical injection.
In this paper, the performance of polymer flooding, after preflush slug, in high salinity reservoir is investigated by numerical simulation means. The injected slugs, both preflush and polymer, are driven by water. The objective is to identify the relationship between preflush, polymer, and drive water characteristics and oil recovery. Seven parameters were considered: preflush slug size, preflush salinity, polymer slug size, polymer concentration, polymer slug salinity, and drive water salinity. The results show that these parameters have various degree of influence on oil recovery. For example, increasing the preflush slug size would results in more oil recovery especially during the early time. Detailed findings will be presented in the paper.
Haider, Bader Y.A. (Kuwait Oil Company) | Rachapudi, Rama Rao Venkata Subba (Kuwait Oil Company) | Al-Yahya, Mohammad (Kuwait Oil Company) | Al-Mutairi, Talal (Kuwait Oil Company) | Al Deyain, Khaled Waleed (Kuwait Oil Company)
Production from Artificially lifted (ESP) well depends on the performance of ESP and reservoir inflow. Realtime monitoring of ESP performance and reservoir productivity is essential for production optimization and this in turn will help in improving the ESP run life. Realtime Workflow was developed to track the ESP performance and well productivity using Realtime ESP sensor data. This workflow was automated by using real time data server and results were made available through Desk top application.
Realtime ESP performance information was used in regular well reviews to identify the problems with ESP performance, to investigate the opportunity for increasing the production. Further ESP real time data combined with well model analysis was used in addressing well problems.
This paper describes about the workflow design, automation and real field case implementation of optimization decisions. Ultimately, this workflow helped in extending the ESP run life and created a well performance monitoring system that eliminated the manual maintenance of the data .In Future, this workflow will be part of full field Digital oil field implementation.
Al-salali, Yousef Zaid (Kuwait Oil Company) | Ayyavoo, ManiMaran (Kuwait Oil Company) | Al-ibrahim, Abdullah Reda (Kuwait Oil Company) | Al-Bader, Haifa (Kuwait Oil Company) | Duggirala, Vidya Sagar (Kuwait Oil Company) | Subban, Packirisamy (Kuwait Oil Company)
This paper discusses the outstanding performance achieved in a deep HPHTJurassic formation drilled using Potassium Formate based fluid. This paper alsodescribes methodology adopted for short term testing and stimulation of anexploratory well and finally the field results.
Drilling and completion of deep Jurassic formations in the state of Kuwaitis generally done with Oil Base Mud (OBM) weighted with Barite. Duringdrilling, barite causes significant formation damage to the carbonates withnatural fractures and it is essential to stimulate the well to evaluate thereal reservoir potential. Formation damage is usually treated with matrix acidstimulation, however barite does not respond to acid. Kuwait Oil Company (KOC)was in search for an alternative drilling fluid causing relatively lessformation damage and also responds to remedial actions. Potassium Formate brinewith suitable weighting agent to achieve sufficient mud weight around 16ppg wasselected for field trial in one of the exploratory wells. Formate based brineis a high-density Water Base Mud (WBM) which maintains rheological stability athigh temperature and minimizes formation damage.
Last 2,000 feet in 6" hole section of 18,000 feet well was drilled using15.9 ppg Potassium Formate WBM. During short term testing, acid wash alone wassufficient to remove the formation damage and productivity has tripled which isunlikely in case of wells drilled with OBM.
This case study shows how Potassium Formate based mud enhanced theproductivity and reduced the testing time and cost. Based on the successfulfield test results, it is planned to drill future Jurassic deep formation withPotassium Formate based fluids in future.
The Middle Minagish Oolite Formation is 450 to 550 feet thick interval of porous limestone reservoir, composed of peloidal/skeletal grainstones with lesser amount of packstone, oolitic grainstone, wackstone and mudstone in Umm Gudair field, West Kuwait. It is characterized by small scale reservoir heterogeneity, primarily related to the depositional as well as diagenetic features. Capturing reservoir properties in micro scale and its spatial variation needs special attention in this reservoir due to its inherent anisotropy. Reservoir properties will depend on the level that we are analyzing on reservoir (millimeter to meter scale). Here we used Electrical Borehole Image (EBI) and Nuclear Magnetic Resonance (NMR) to capture small scale feature of Umm Gudair carbonate reservoir and compared them with core data
In present work, reservoir properties (including texture, facies, porosity and permeability) interpreted by the EBI shows good match with NMR driven properties and core data. Textural changes in image logs also match well with pore size distribution from NMR logs. Further highly porous zones which are considered either due to primary porosity or vugs match with larger pores of NMR logs and these corroborates with also core derived porosity. A good match has been observed between EBI, NMR and cored derived porosity. Permeability calculations have also been made and compared with core data. A detail workflow has been developed here to interpret reservoir properties on un-cored wells, where only low vertical resolution data is available. This technique is quite useful to identify the characters and mode of origin highly porous zones in reservoir section which are generally not identifiable by low resolution standard logs. This workflow will allow us to interpret the heterogeneity at high resolution level in un-cored wells, as results are validated with integration of EBI, NMR and core data.
Mishra, Prasanta Kumar (Kuwait Oil Company) | Al-Harthy, Abdulrahman (Target Oilfields Services) | Al-Kanderi, Jasem M. (Kuwait Oil Company) | Al-Raisi, Muatasam (Target Oilfields Services) | Al-Alawi, Ghaliah (Target Oilfields Services) | Alhashmi, Salim (Target Oilfields Services) | Turkey, Shaikha (Kuwait Oil Company)
This paper presents the main steps of rock-typing workflow and the technique applied to estimate permeability.
Reservoir rock typing (RRT) is a process of up-scaling detailed geological and petrophysical information to provide more accurate input for 3D geological and flow simulation models. The reservoir rocks that correspond to a particular rock type should have similar rock fabric, pore types and pore throat size distribution. The study integrated multi-scale data types to develop a robust and predictable rock type scheme. This consists of detailed sedimentological description of depositional environment and associated sedimentary features, detailed numerical petrographic analysis of rock texture, grain types, porosity types and rock mineralogy and petrophysical data grouping using openhole log and core plugs porosity-permeability relationship and pore throat size distribution (MICP).
The main objective was to develop a reliable reservoir rock type scheme that captures the heterogeneity in Jurassic carbonate reservoir for the Middle Marrat Formation in South East Kuwait area and implementation of the RRT to the permeability prediction within the field. Integration of the thin sections, porosity-permeability, pore throat size and distribution has resulted in the identification of reservoir rock types. A total of 14 different rock types were identified within the reservoir interval in the cored wells, which is subsequently grouped into eight due to modelling limitation. The RRT up-scaling was done in a way to minimize the impact of grouping on permeability and saturation computations. The prediction success between the cored RRT and the predicted RRT using openhole data is more than 85%. As a result, the permeability computation success between core plugs and computed permeability using the RRT is more than 80%.
The North Kuwait Jurassic Gas (NKJG) reservoirs are currently under development by KOC with assistance from Shell under an Enhanced Technical Services Agreement (ETSA). The fractured carbonate reservoirs contain gas condensate and volatile oil at pressures up to 11,500 psi with 2.5% H2S and 1.5% CO2. This paper describes the planning and implementation of a Well Integrity Management System (WIMS) that allows the safe management of the wells that are being drilled in this hazardous environment.
The wells are designed and constructed in accordance with KOC standards and on transfer of ownership from Deep Drilling Group to Production Services Group have their integrity managed under WIMS. The system is a structured process, relating the frequency and extent of routine monitoring and testing to the particular risks associated with the wells. Compliance with WIMS requirements are routinely reported so that all are aware of the current state of well integrity. WIMS is initially managed through simple spreadsheets and during 2012 is being integrated into KOC's Digital Field infrastructure.
Initially, WIMS has been applied to the range of wells ‘owned' by Production Services Group and tests currently carried out by Well Surveillance Group under PSG's direction. In order to realise the full assurance of safe operation the scope of WIMS application is being extended to the full well population, including suspended wells, and the full range of tests required.
Implementation of WIMS will allow KOC (NKJG) to be able to state that ‘our wells are safe and we know it'.