|Theme||Visible||Selectable||Appearance||Zoom Range (now: 0)|
Rosenhagen, Nicolas M. (Colorado School of Mines) | Nash, Steven D. (Anadarko Petroleum Corporation) | Dobbs, Walter C. (Anadarko Petroleum Corporation) | Tanner, Kevin V. (Anadarko Petroleum Corporation)
Abstract The volume of stimulation fluid injected during hydraulic fracturing is a key performance driver in the horizontal development of the Niobrara formation in the Denver-Julesburg (DJ) Basin, Colorado. Oil production per well generally increases with stimulation fluid volume. Often, operators normalize both production and fluid volume based on stimulated lateral length and investigate relationships using "per-ft" variables. However, data from well-based approaches commonly display such wide distributions that no useful relationships can be inferred. To improve data correlations, multivariate analysis normalizes for parameters such as thermal maturity, depth, depletion, proppant intensity, drawdown, geology and completion design. Although advancements in computing power have decreased cycle times for multivariate analysis, preparing a clean dataset for thousands of wells remains challenging. A proposed analytical method using publicly available data allows interpreters to see through the noise and find informative correlations. Using a data set of over 5000 wells, we aggregate cumulative oil production and stimulation fluid volumes to a per-section basis then normalize by hydrocarbon pore volume (HCPV) per section. Dimensionless section-level Cumulative Oil versus Stimulation Fluid Plots ("Normalization" or "N-Plot") present data distributions sufficiently well-defined to provide an interpretation and design basis of well spacing and stimulation fluid volumes for multi-well development. When coupled with geologic characterization, the trends guide further refinement of development optimization and well performance predictions. Two example applications using the N-Plot are introduced. The first involves construction of predictive production models and associated evaluation of alternative development scenarios with different combinations of well spacing and completion fluid intensity. The second involves "just-in-time" modification of fluid intensity for drilled but uncompleted wells (DUC's) to optimize cost-forward project economics in an evolving commodity price environment.
Abstract In some basins, large scale development of unconventional stacked-target plays requires early election of well targeting and spacing. Changes to the initial well construction framework can take years to implement due to lead times for land, permitting, and corporate planning. Over time, as operators wish to fine tune their development plans, completion design flexibility represents a powerful force for optimization. Hydraulic fracturing treatment plans may be adjusted and customized close to the time of investment. With a practical approach that takes advantage of physics-based modeling and data analysis, we demonstrate how to create a high-confidence, integrated well spacing and completion design strategy for both frontier and mature field development. The Dynamic Stimulated Reservoir Volume (DSRV) workflow forms the backbone of the physics-based approach, constraining simulations against treatment, flow-back, production, and pressure-buildup (PBU) data. Depending on the amount of input data available and mechanisms investigated, one can invoke various levels of rigor in coupling geomechanics and fluid flow – ranging from proxies to full iterative coupling. To answer spacing and completions questions in the Denver Basin, also known as the Denver-Julesburg (DJ) Basin, we extend this modeling workflow to multi-well, multi-target, and multi-variate space. With proper calibration, we are able generate production performance predictions across the field for a range of subsurface, well spacing, and completion scenarios. Results allow us to co-optimize well spacing and completion size for this multi-layer column. Insights about the impacts of geology and reservoir conditions highlight the potential for design customization across the play. Results are further validated against actual data using an elegant multi-well surveillance technique that better illuminates design space. Several elements of subsurface characterization potentially impact the interactions among design variables. In particular, reservoir fluid property variations create important effects during injection and production. Also, both data analysis and modeling support a key relationship involving well spacing and the efficient creation of stimulated reservoir volumes. This relationship provides a lever that can be utilized to improve value based on corporate needs and commodity price. We introduce these observations to be further tested in the field and models.
Abstract Unconventional completions in North America have seen a paradigm shift in volumes of proppant pumped since 2014. There is a clear noticeable trend in both oil prices and proppant volumes – thanks to low product and service costs that accompanied the oil price crash in early 2015. As the industry continues to recover, operators are reevaluating completion designs to understand if these proppant volumes are beyond what is optimal. This paper analyzes trends in completion sizes and types across all major unconventional oil and gas plays in the US since 2011 and tracks their impact on well productivity. Completion and production data since 2011 from more than 70,000 horizontal wells in seven major basins (Gulf Coast, Permian, Appalachian, Anadarko, Haynesville, Williston and Denver Julesburg basins) and 11 major oil/gas producing formations were analyzed to examine developments in proppant and fluid volumes. Average concentration of proppant per gallon of fluid pumped was used to understand transitional trends in fracturing fluid types with time. Production performance indicators such as First month, Best 3 or Best 12 months of oil and gas production were mapped against completion volumes to evaluate if there are added economic advantages to pumping larger designs. In general, all major basins have seen progressive improvements in average well performance since 2011, with the Permian Basin showing the highest improvement, increasing from an average first-six-months oil production of 25,000 bbl in 2011 to 75,000 bbl in 2017. The Gulf Coast basin, where the Eagle Ford formation is located, has seen a 6-fold increase in proppant volumes pumped per foot of lateral since 2011 while the Permian and Appalachian basins hit peak proppant volumes in 2015 and 2016 respectively. In Permian and Eagleford wells, higher proppant volumes in general have resulted in better production up to a certain concentration. In Williston and Denver basins, most operators are moving away from gelled fluids, and reduced average proppant concentration per fluid volume pumped shows inclination toward hybrid or slickwater designs. While some of these observations are tied to reservoir quality, proppant volumes have begun to peak as operators have either reached an optimal point or are in the process of reducing volumes. Demand for proppant is expected to nearly double by 2020. As oil prices continue to recover, well AFEs continue to increase, despite multiple efforts to improve capital efficiency. The need for enhanced fracture conductivity and extended half-lengths on EURs are been discussed by combining actual observed production data and sensitivities using calibrated production models. The industry is moving toward large-volume slickwater fracturing operations using smaller proppants, but he operating landscape is expected to see a correction when such designs become less economical.
Abstract Accelerating the learning curve in the development of the Vaca Muerta utilizing lessons learned in North American unconventional resource plays is the focus of this paper. Reducing completion costs while maintaining high productivity has become a key objective in the current low-price environment. Completion diagnostics have been demonstrated to optimize stimulation and completion parameters that have shaped successful field developments. The paper reviews stimulation diagnostic data from wells completed in the Tuscaloosa Marine Shale, Eagle Ford, Wolfcamp and Niobrara shale formations. Case histories are presented in which proppant and fluid tracers were successfully employed in completion optimization processes. In the examples presented, diagnostic results were used to assess the stimulation of high productivity intervals within a target zone, evaluate various completion methods, and optimize stage and cluster spacing. The diagnostic data were compared with post-frac production rates in an effort to correlate completion changes with well performance. Results presented compare first, engineered perforations versus conventional geometrically spaced perforations to drive up effectiveness in cluster stimulation. Second, new chemistries, such as nanosurfactant, versus conventional chemistries to cut either completion cost or prove their profitability. Third, employing an effective choke management strategy to improve well productivity. Last, as in any stacked pay, determining fracture height growth in order to optimize well density, well spacing, field development and ultimately the recovery of the natural resources. Completion effectiveness is shown to be improved by landing laterals in high productivity target intervals, increasing proppant coverage across the lateral by utilizing the most effective completion methods, optimizing cluster spacing and decreasing the number of stages to reduce completion costs while achieving comparable production rates. Cluster treatment efficiency (CTE), in particular, has become a critical metric when optimizing hydraulic fracturing treatment designs based on current and future well densities. It can be used to rationalize well performance as well as to identify possible candidates for a refrac program. Using completion diagnostics, successful completion techniques were identified that led to production enhancements and cost reductions in prolific plays such as the Tuscaloosa Marine Shale, Eagle Ford, Wolfcamp and Niobrara.
Abstract In unconventional resource plays, constructing a sound geological model that ties various well information is imperative for properly extracting and integrating well and seismic information and for predictive and prescriptive analytic workflows. Unlike conventional plays, unconventional plays that span basins have potentially tens of thousands of wells. Constructing geological models to include all wells and then updating them as additional ones become available can be a daunting task. When constructing large cross sections, regional stratigraphic patterns are easily discernible visually. Converting these geologic events and spatial patterns to digital information using the power of the computer and new machine learning techniques is becoming more important than ever as geoscientists attempt to "keep up" with all this information. This paper will cover a modern technology toward that end. Introduction Previous attempts have been made to pick geologic well tops automatically using expert systems (Olea et al.), neural networks (Luthi et al.), and dynamic programming (Lineman et al., Inazaki, Zoraster et al., Fang et al.). While these previous efforts have been helpful in defining the problems and building blocks to solve well-log correlation automatically, they have clearly been much less successful than has been observed in seismic picking algorithms that started in the 1980's. This is mainly owing to the nature of seismic data. Seismic traces are band-limited, closely spaced (on the order of meters) with neighboring traces almost identical to each other, and are consistent with the same start and ending times, sample rates, and vertical representation. These traits make correlating neighboring peaks, troughs and zero-crossings reasonably easy as compared to well logs, which are more widely spaced (on the order of hundreds to thousands of meters), have inconsistent depth ranges with possible gaps, and may be from highly non-vertical well bores. As more oil companies transition from exploration to resource recovery optimization and the number of new wells in well-known basins dramatically increases, geologic cross sections across these basins begin to take on more of a seismic look, as shown in Figures 1 and 2 below. When logs are hung on stratigraphic datums, as Figure 2 shows, geologic intervals are readily evident across many tens, if not hundreds or thousands of wells. Not only is the lateral consistency of strong events evident, such as the Codell in this case, but patterns of finer detail in the sequence stratigraphy (flooding surfaces, onlap, thickening and thinning from changing accommodation and sediment supply) become more visually apparent. Further refined picking of associated events is warranted but could prove tedious and time consuming if done manually.
Summary Horizontal drilling and artificial stimulation have made the Cretaceous Niobrara Formation, Denver-Julesburg Basin, a prolific, self-sourced, unconventional reservoir that yields both gas and liquids. As a carbonate-dominated reservoir, pore networks documented in most other unconventional shale reservoirs are not necessarily analogous. In this study pore system characterization was achieved using focused ion-beam scanning electron microscopy (FIB-SEM) and Avizo Fire™ image segmenting software. We focused on samples from the B chalk, which is the primary landing zone for horizontal wells in the Niobrara. Material was examined from four cores representing thermal maturities ranging from the oil window (Ro≈0.7, GOR ≈ 1,000) to the dry-gas window (Ro≈1.2, GOR >20,000). At the microfacies scale, samples consisted of chalks, marly chalks, chalky marls, and submillimeter laminations of marl in the chalk. Electron microprobe elemental mapping shows that organic macerals are concentrated in the marl interlaminations whereas finely disseminated organic matter is in peloids (particularly those that are black in thin section). Intercrystalline pores dominate all samples and occur primarily between fragments of coccolith debris and recrystallized calcite, and to a lesser degree between clay minerals. Median equivalent circular diameters of intercrystalline pores range from ~100 to 400 nm. Total image porosity averages 3.9% with a range of 1.4% to 10%. Highest porosity is in peloids within marly chalks. Residual hydrocarbon fills many former intercrystalline pores and organic macerals occur in marl lamina. In most cases, residual hydrocarbon-filled pores exceed the amount of open pores, and those filled pores have median equivalent diameters than range from 300 to 900 nm. Organic material exhibits intraparticle "bubble" pores with the abundance of bubble porosity in organics showing no increase with thermal maturity above ~0.7 Ro. The size of hydrocarbon-filled pores is greatest in the most thermally mature well, and greater than the size of open intercrystalline pores in all wells. This suggests pores that were not filled by organic matter underwent continued reduction due to diagenesis after hydrocarbon migration.
Abstract Maximizing well productivity and improving drilling efficiency remains a major challenge while drilling horizontal wells in US-land unconventional shale plays in the last few years. Reducing drilling times and eliminating trips for the curve bottomhole assembly (BHA) requires a motor that can be rotated at high RPM in the vertical section while still achieving buildup rate (BUR) in the curve. The challenges of horizontal well drilling in US land led to the recent introduction of a steerable optimized design motor (ODM) with a short bit-to-bend (BTB) distance. These ODMs achieved higher BUR in the curves than the conventional motors at lower adjustable kick-off (AKO) sub angle. Although the planned dogleg severities (DLS) stayed at the similar level, drilling vertical and curve sections of the horizontal wells in the Niobrara shale unconventional play posed additional challenges: –Rotating the BHA in the vertical section with a high AKO angle –Dealing with formation challenges –Holding the toolface to achieve consistent BUR in the curve –Completing the vertical and curve sections in one run The introduction in 2013 of the latest-generation steerable motors (LGSM) with further reduced short BTB distance design helped the operator overcome these challenges. The new system significantly improved drilling performance with excellent directional control. This paper will discuss the design, testing and results of horizontal wells drilled using the LGSM in the Niobrara unconventional shale play.
Introduction The Niobrara play in the Denver Julesburg basin is proving to be one of the more complicated horizontal shale oil plays within the industry. Multiple geologic challenges, such as complex normal faulting, basement tectonics, fractures, changing stress fields, highly uneven thermal maturities, and variations in reservoir quality have all contributed to the inconsistent production results experienced to date. Contributing to an already difficult set of geologic conditions, a wide range of horizontal drilling practices and procedures have also dramatically affected these irregular production results. Even in the so-called geologic " sweet spot" of the Niobrara in Wattenberg field, some of the early production rates have been disappointing, primarily because of drilling and completion practices. Horizontal drilling in the Niobrara presents many technical challenges to operators and drilling engineers. These challenges range from building the curve in the Sharron Springs, changes to structural dip and extensive normal faulting along the length of the lateral, and reservoir/sweet spot variations within the multiple target chalk benches, to completion challenges related to well path orientation. Before drilling a well, many considerations must be precisely understood during the pre-planning phase of a horizontal drilling program. Such questions arise, like whether the operator should try to stay in zone and chase the faulted target, if one should geosteer-to-plan, drill toe-up, toe-down, if the faults hurt or help production, the orientation of the lateral, which benches will be the best targets, and, most importantly, how and where should one land the well? These issues are constantly evaluated by operators; however, economic success from these horizontal programs is often limited because of target-depth uncertainties associated with sparse well control, time-to-depth conversion of seismic information, and an apparent misunderstanding of the subsurface regarding reservoir sweet spots and stress fields. As an example, the B Chalk target in northern Weld County, Colorado is approximately 8% of the total thickness of the Niobrara and ~100 ft. below the unconformity surface, yet directional plans for this objective still tend to be based on Niobrara time structure horizons. This approach can be misleading when trying to accurately place a horizontal well in a thin chalk target. Horizontal Well Planning Extensive pre-planning for Niobrara horizontals, whether for a single well or a multi-well pad, is one of the most critical components of the drilling process. Pre-planning is key to successful geosteering, particularly when the geology is complex. Operators must know where the well is at all times to help ensure the bit remains in the target zone for thousands of feet, especially when drilling extended-reach wells. Additionally, the planning process anticipates exactly how the lateral is to be landed, where and when faults will be crossed, and how the stratigraphic dips change with respect to the angle of the bit. Careful pre-planning results in optimized completion staging and design and contributes to higher EURs. URTeC 1581354
Introduction The seismic characterization of the Niobrara presented here is based on recently acquired wide-azimuth 3D seismic data in Weld County, N.E Colorado (Figure 1), and publically available well data for calibration within the area. The presentation starts with the location and geologic setting of the Niobrara and its vertical reference to the seismic response (Figure 2). An association is made using geometric attributes relating the complex subtle faulting to the Laramide Orogeny, which occurred in a series of pulses with intervening quiescent phases, possibly influencing hydrocarbon production. This sets the local structural framework for using fracture anisotropy and related rock properties for locating possible areas of significant interest. The Niobrara Formation lies in a thermally mature fairway which today is the Denver-Julesburg Basin. These sediments were deposited in an ancient Cretaceous seaway (Western Interior Seaway) running in a north-south direction through the mid-western United States, with ends open to the ocean. The Niobrara is carbonate rich on the east side, where the study area is located producing oil, and clay rich on the west side of the Basin. The Smoky Hill Chalk Member is 300–400 ft thick and composed of three key limestones (chalk) benches A, B and C which are each approximately 30–40 ft. thick (Figure 2). They are named from their resistive nature as seen along cliff exposures, and are intercalated with organic rich marls, the source rock. URTeC 1576924
Summary The Upper Cretaceous Codell and Niobrara formations are primary targets in the Wattenberg field (Figure 1) of the Denver-Julesberg basin in northwest Colorado. Although initial discovery of producible hydrocarbons in the Codell occurred in 1955, it was not until the early 1980s when larger scale completion began for the Codell and Niobrara wells throughout the field. Since the early 1980s, there have been more than 10,000 Codell and Niobrara completions in the Wattenberg field. Originally, the Codell and Niobrara formations were completed individually within the same well. In the early 1990s, operators introduced a limited-entry style stimulation technique in an effort to effectively stimulate both formations with one hydraulic fracturing treatment. Although there is currently significant activity in the field with regard to horizontal well completion in both the Codell and Niobrara formations, extensive vertical well completion still exists. Various completion strategies are currently employed for vertical well completion, including individual stimulation of the Codell and Niobrara formations, limited-entry completion of both formations, and completion of only one of the producing horizons, leaving the other behind pipe. Furthermore, there are many cases of recompletions where an operator has re-entered a Codell-only well at a later date to complete the Niobrara. Spatial sampling was employed to assess the effectiveness of various completion strategies in one area of the Wattenberg field. Spatial sampling is a documented method for comparing large groups of wells with their direct offsets. The original intent of the spatial sampling method was to identify underperforming wells; however, the method has also been employed as a way to compare various completion or stimulation techniques. Introduction The Codell and Niobrara formations are two of the primary producing horizons in the Wattenberg field of the Denver-Julesburg basin located in northeastern Colorado. Although discovered earlier, few wells were drilled in the Codell or Niobrara before 1981 (Wright 1988). Since that time, there have been more than 10,000 wells drilled in the Codell and/or Niobrara (COGCC 2013). URTeC 1580185