Najmah-Sargelu Formations of Kuwait show considerable potential as a new unconventional hydrocarbon play and produces mainly from fractures. The key uncertainties which affect the productivity are the nature and distribution of permeable fracture networks, and the limits of oil accumulation.
This paper presents the results from whole-rock elemental analysis of three cored wells in UG field. The main objectives of this study are to use high-resolution elemental chemostratigraphy to gain a better understanding of the detailed stratigraphy and correlation of the Najmah-Sargelu Formations, to assess the chemo-sedimentology for determining the intervals of high organic content, to estimate the mineralogy of the sequence using an algorithm developed for an analog formation in North America; and to determine the most likely intervals to contain fractures, using a brittleness algorithm.
A clear chemo stratigraphic zonation is recognized within the Najmah-Sargelu Formation. The larger divisions are driven mainly by inherent lithological variation. The finer divisions are delineated by more subtle chemo stratigraphic signals (K2O/Th and Rb/Al2O3 ratios) and preservation of organic matter (high V, Ni, Mo, and U abundances). Zones of alternating brittleness and ductility are clearly identified within the interbedded limestones and marlstones of Najmah-Sargelu Formation.
Two unexpected but important features of the Najmah-Sargelu limestones were elucidated by the elemental data. Brittle, high-silica spiculites, with virtually no clay or silt, are more common than previously recognized from petrophysical logs and core descriptions in the upper Najmah limestones. In addition, the limestones adjacent to the spiculites tend to contain bitumen as pore-filling are recognized by the trace metal proxies. Ternary plots of V, Ni, and Mo differentiate the combinations of kerogen and bitumen present in the Najmah-Sargelu Formations.
The clarity and sensitivity of the chemostratigraphic signals are sufficient to enhance formation evaluation, and can also assist borehole positioning using the RockWiseSM ED-XRF instrument at wellsite.
Acharya, Mihir Narayan (Kuwait Oil Company) | Kabir, Mir Md Rezaul (Kuwait Oil Company) | Al-Ajmi, Saad Abdulrahman Hassan (Kuwait Oil Company) | Pradhan, San Prasad (Kuwait Oil Company) | Dashti, Qasem M. (Kuwait Oil Company) | Al-anzi, Ealian H.D. (Kuwait Oil Company) | Chakravorty, Sandeep (Schlumberger)
The deep, sub-salt reservoir complex is tiered with fractured tight carbonate at bottom and top, with the two sub-units of "upper unconventional kerogen?? and "lower inter-bedded kerogen-carbonate?? in the middle. This depositional setting is challenging for horizontal well placement where the thicknesses of respective sub-units are about 50 and 30 feet with varying geomechanical and petrophysical properties. Additionally, this complexity poses limitations in completions and effective stimulation of the Kimmeridgian-Oxfordian reservoirs in several gas fields at development stage in Kuwait.
A horizontal well is placed in the lower sub-unit of the laminated complex of unconventional kerogen and fractured carbonate reservoir as a Maximum Reservoir Contact (MRC) type well. A pilot mother-bore was drilled and logged to identify the lithological properties across the entire vertical domain - facilitates the optimization of horizontal drain-hole placement within the targeted reservoir units.
No wellbore stability issues in drilling were predicted based on the geomechanical understanding where core-calibrated logs from offset vertical wells were considered. However, this modeling method did not have the functionality to integrate the impact of drawdown on the laminated formation which became unstable and collapsed during the short open-hole drill-stem test (DST) plugging the tubing prior to the final completions. An alternative "book-shelf?? geomechanical model was considered at pre-drill stage for predicting the wellbore stability. Once the drilling was completed, the time-lapsed multi-arm caliper indicated the validity of the alternative methodology in predicting the unstable stack of laminations in kerogen-rich strata.
The paper discusses an optimization methodology to enhance the understanding of static and dynamic geomechanical stability through the use of BHI data. Objective of the proposed method is to help improve the effectiveness of completions where wellbore stability due to geomechanical complexity in stacked-pay reservoirs is a primary wellbore challenge in deploying the completions and executing a subsequent stimulation and testing campaign.