Haider, Bader Y.A. (Kuwait Oil Company) | Rachapudi, Rama Rao Venkata Subba (Kuwait Oil Company) | Al-Yahya, Mohammad (Kuwait Oil Company) | Al-Mutairi, Talal (Kuwait Oil Company) | Al Deyain, Khaled Waleed (Kuwait Oil Company)
Production from Artificially lifted (ESP) well depends on the performance of ESP and reservoir inflow. Realtime monitoring of ESP performance and reservoir productivity is essential for production optimization and this in turn will help in improving the ESP run life. Realtime Workflow was developed to track the ESP performance and well productivity using Realtime ESP sensor data. This workflow was automated by using real time data server and results were made available through Desk top application.
Realtime ESP performance information was used in regular well reviews to identify the problems with ESP performance, to investigate the opportunity for increasing the production. Further ESP real time data combined with well model analysis was used in addressing well problems.
This paper describes about the workflow design, automation and real field case implementation of optimization decisions. Ultimately, this workflow helped in extending the ESP run life and created a well performance monitoring system that eliminated the manual maintenance of the data .In Future, this workflow will be part of full field Digital oil field implementation.
Najmah-Sargelu Formations of Kuwait show considerable potential as a new unconventional hydrocarbon play and produces mainly from fractures. The key uncertainties which affect the productivity are the nature and distribution of permeable fracture networks, and the limits of oil accumulation.
This paper presents the results from whole-rock elemental analysis of three cored wells in UG field. The main objectives of this study are to use high-resolution elemental chemostratigraphy to gain a better understanding of the detailed stratigraphy and correlation of the Najmah-Sargelu Formations, to assess the chemo-sedimentology for determining the intervals of high organic content, to estimate the mineralogy of the sequence using an algorithm developed for an analog formation in North America; and to determine the most likely intervals to contain fractures, using a brittleness algorithm.
A clear chemo stratigraphic zonation is recognized within the Najmah-Sargelu Formation. The larger divisions are driven mainly by inherent lithological variation. The finer divisions are delineated by more subtle chemo stratigraphic signals (K2O/Th and Rb/Al2O3 ratios) and preservation of organic matter (high V, Ni, Mo, and U abundances). Zones of alternating brittleness and ductility are clearly identified within the interbedded limestones and marlstones of Najmah-Sargelu Formation.
Two unexpected but important features of the Najmah-Sargelu limestones were elucidated by the elemental data. Brittle, high-silica spiculites, with virtually no clay or silt, are more common than previously recognized from petrophysical logs and core descriptions in the upper Najmah limestones. In addition, the limestones adjacent to the spiculites tend to contain bitumen as pore-filling are recognized by the trace metal proxies. Ternary plots of V, Ni, and Mo differentiate the combinations of kerogen and bitumen present in the Najmah-Sargelu Formations.
The clarity and sensitivity of the chemostratigraphic signals are sufficient to enhance formation evaluation, and can also assist borehole positioning using the RockWiseSM ED-XRF instrument at wellsite.
The Middle Minagish Oolite Formation is 450 to 550 feet thick interval of porous limestone reservoir, composed of peloidal/skeletal grainstones with lesser amount of packstone, oolitic grainstone, wackstone and mudstone in Umm Gudair field, West Kuwait. It is characterized by small scale reservoir heterogeneity, primarily related to the depositional as well as diagenetic features. Capturing reservoir properties in micro scale and its spatial variation needs special attention in this reservoir due to its inherent anisotropy. Reservoir properties will depend on the level that we are analyzing on reservoir (millimeter to meter scale). Here we used Electrical Borehole Image (EBI) and Nuclear Magnetic Resonance (NMR) to capture small scale feature of Umm Gudair carbonate reservoir and compared them with core data
In present work, reservoir properties (including texture, facies, porosity and permeability) interpreted by the EBI shows good match with NMR driven properties and core data. Textural changes in image logs also match well with pore size distribution from NMR logs. Further highly porous zones which are considered either due to primary porosity or vugs match with larger pores of NMR logs and these corroborates with also core derived porosity. A good match has been observed between EBI, NMR and cored derived porosity. Permeability calculations have also been made and compared with core data. A detail workflow has been developed here to interpret reservoir properties on un-cored wells, where only low vertical resolution data is available. This technique is quite useful to identify the characters and mode of origin highly porous zones in reservoir section which are generally not identifiable by low resolution standard logs. This workflow will allow us to interpret the heterogeneity at high resolution level in un-cored wells, as results are validated with integration of EBI, NMR and core data.
Mishra, Prasanta Kumar (Kuwait Oil Company) | Al-Harthy, Abdulrahman (Target Oilfields Services) | Al-Kanderi, Jasem M. (Kuwait Oil Company) | Al-Raisi, Muatasam (Target Oilfields Services) | Al-Alawi, Ghaliah (Target Oilfields Services) | Alhashmi, Salim (Target Oilfields Services) | Turkey, Shaikha (Kuwait Oil Company)
This paper presents the main steps of rock-typing workflow and the technique applied to estimate permeability.
Reservoir rock typing (RRT) is a process of up-scaling detailed geological and petrophysical information to provide more accurate input for 3D geological and flow simulation models. The reservoir rocks that correspond to a particular rock type should have similar rock fabric, pore types and pore throat size distribution. The study integrated multi-scale data types to develop a robust and predictable rock type scheme. This consists of detailed sedimentological description of depositional environment and associated sedimentary features, detailed numerical petrographic analysis of rock texture, grain types, porosity types and rock mineralogy and petrophysical data grouping using openhole log and core plugs porosity-permeability relationship and pore throat size distribution (MICP).
The main objective was to develop a reliable reservoir rock type scheme that captures the heterogeneity in Jurassic carbonate reservoir for the Middle Marrat Formation in South East Kuwait area and implementation of the RRT to the permeability prediction within the field. Integration of the thin sections, porosity-permeability, pore throat size and distribution has resulted in the identification of reservoir rock types. A total of 14 different rock types were identified within the reservoir interval in the cored wells, which is subsequently grouped into eight due to modelling limitation. The RRT up-scaling was done in a way to minimize the impact of grouping on permeability and saturation computations. The prediction success between the cored RRT and the predicted RRT using openhole data is more than 85%. As a result, the permeability computation success between core plugs and computed permeability using the RRT is more than 80%.
The North Kuwait Jurassic Gas (NKJG) reservoirs are currently under development by KOC with assistance from Shell under an Enhanced Technical Services Agreement (ETSA). The fractured carbonate reservoirs contain gas condensate and volatile oil at pressures up to 11,500 psi with 2.5% H2S and 1.5% CO2. This paper describes the planning and implementation of a Well Integrity Management System (WIMS) that allows the safe management of the wells that are being drilled in this hazardous environment.
The wells are designed and constructed in accordance with KOC standards and on transfer of ownership from Deep Drilling Group to Production Services Group have their integrity managed under WIMS. The system is a structured process, relating the frequency and extent of routine monitoring and testing to the particular risks associated with the wells. Compliance with WIMS requirements are routinely reported so that all are aware of the current state of well integrity. WIMS is initially managed through simple spreadsheets and during 2012 is being integrated into KOC's Digital Field infrastructure.
Initially, WIMS has been applied to the range of wells ‘owned' by Production Services Group and tests currently carried out by Well Surveillance Group under PSG's direction. In order to realise the full assurance of safe operation the scope of WIMS application is being extended to the full well population, including suspended wells, and the full range of tests required.
Implementation of WIMS will allow KOC (NKJG) to be able to state that ‘our wells are safe and we know it'.
During recent years there has been a significant increase in the use of filter cake removal systems that involve in-situ release of formic or lactic acid during the clean-up stages of the reservoir section, particularly in limestone formations. Furthermore, there have been opportunities to compare the field performance of these relatively small applications of weak, organic acids with significantly larger application volumes of highly concentrated hydrochloric acid (HCl). Surprisingly, some results showed that the smaller volumes of the weaker, organic acids could have equivalent or better performance than that produced by the more traditional HCl-based treatments. In particular this relationship was also observed in cases where the volume of HCl applied had significantly greater power to dissolve limestone than was the case for treatment with the more successful organic acid.
It is well known that productivity of wells in carbonate reservoirs is usually greatly improved by treatments designed to remove the filter cake and the low-permeability zone created by the drilling process, but it is not obvious why smaller volumes per foot of weak organic acid should be more effective than larger volumes per foot of stronger and more concentrated mineral acid.
It has been observed that the acid precursors which release the in-situ acids are applied to the formation in a neutral condition. The paper discusses the implications of using neutral acid precursors, and laboratory data is presented showing the effects of such treatments on the near-wellbore matrix permeability.
Hruška, Marina (Chevron Energy Technology Company) | Bachtel, Steven (Chevron Energy Technology Company) | Archuleta, Bonny (Chevron Energy Technology Company) | Skalinski, Mark (Chevron Energy Technology Company)
Here the nodule background consists of points at which evaporite flag is zero. These properties (except for the vertical proportion of evaporite) were averaged vertically over those depth samples in the image segment where the corresponding property being averaged is not zero. Use of this selected average rather than the segment average is needed for identification of the facies with common evaporite nodules, because nodules may be scattered and not present at every sampled depth. Individual nodules were identified at a given depth of the FMI by finding the breaks in a series of bright points in the image generated from the evaporite flag. Here, the gap between pads is not considered a break, to allow a possibility of nodules larger than the sensor pad.
Carboxybetaine viscoelastic surfactants have been applied in acid diversion and fracturing treatments in which high temperatures and low pH are usually involved. These surfactants are subjected to hydrolysis under such conditions because of the existence of a peptide group (-CO-NH-) in their molecules, leading to changes in the rheological properties of the acid. The objective of this paper is to study the impact of hydrolysis at high temperatures on the apparent viscosity of carboxybetaine viscoelastic surfactant-based acids, and propose the mechanism of viscosity changes by molecular dynamics (MD) simulations.
Surfactant-acid solutions with different compositions (surfactant concentration varied from 4 to 8 wt%) were incubated at 190°F for 1 to 6 hours. Solutions were then partially spent by CaCO3 until the sample pH was 4.5, and the apparent viscosity was measured using a high-temperature/high-pressure (HT/HP) viscometer. To understand the mechanism for viscosity changes on the molecular level, MD simulations were carried out on spent surfactant-acid aqueous systems using the Materials Studio 5.0 Package.
It was found that short-time hydrolysis at high temperatures (for example, 1 to 2 hours at 190°F) led to a significant increase in surfactant-acid viscosity. However, after incubation for 3 hours, phase separation occurred and the acid lost its viscosity. Simulation results showed that viscosity changes of amido-carboxybetaine surfactant acid by hydrolysis at high temperatures may be caused by different micellar structures formed by carboxybetaine and fatty acid soap, its hydrolysis product. The optimum molar ratio of amido-carboxybetaine and fatty acid soap to form worm-like micelles was found to be nearly 3:1 from our simulations.
Our results indicate that hydrolysis at high temperatures has a great impact on surfactant-acid rheological properties. Short time viscosity build-up and effective gel breakdown can be achieved if surfactant-acid treatments are carefully designed; otherwise, unexpected viscosity reduction and phase separation may occur, which will affect the outcome of acid treatments.
This paper discusses the critical requirements for successful well planning, landing, geosteering and completion of an open hole multilateral well, with lateral sections of 2,500 ft and 2,200 ft, drilled in a complex carbonate reservoir in Kuwait.
The structure is dominated by four sets of normal faults trending EW, NS, NW - SE and NE - WS. The reservoir is divided into 10 layers, with reservoir quality generally decreasing from top to bottom. The upper layers exhibit good porosity, vugs and molds while the lower layers are mainly mud-dominated with thin, interbedded brittle layers. As there is no significant water-drive mechanism, the development strategy was to maximize production by connecting the natural fracture network through extensive acid stimulation.
The objective was to isolate problematic formations by landing the well below them, while maximizing reservoir contact in the upper layers. This meant intentionally crossing a major NS-trending extensional fault to maximize fracture intersection and therefore maximize the production potential. Well planning and drilling a high quality wellbore to landing point were identified as critical as the four wells drilled previously had resulted in fishing and side tracking in the intermediate section. Optimizing drilling fluid parameters and drilling practices from the lessons learned, and correct selection of rotary steerable system (RSS) and logging-while-drilling (LWD) tools that led to a successful landing are discussed, as are real-time wellbore placement to maximize production potential using RSS and LWD tools, following best drilling practices and seismic model integration through multi-faulted environment are also discussed. LWD measurements and their integration into the geosteering model, benefits of a high-resolution resistivity image in aiding the identification of fractured zones for stimulation optimization, hole preparation for completion and success and of massive acid stimulation of the open hole laterals using coiled tubing are also discussed.
Acharya, Mihir Narayan (Kuwait Oil Company) | Kabir, Mir Md Rezaul (Kuwait Oil Company) | Al-Ajmi, Saad Abdulrahman Hassan (Kuwait Oil Company) | Pradhan, San Prasad (Kuwait Oil Company) | Dashti, Qasem M. (Kuwait Oil Company) | Al-anzi, Ealian H.D. (Kuwait Oil Company) | Chakravorty, Sandeep (Schlumberger)
The deep, sub-salt reservoir complex is tiered with fractured tight carbonate at bottom and top, with the two sub-units of "upper unconventional kerogen?? and "lower inter-bedded kerogen-carbonate?? in the middle. This depositional setting is challenging for horizontal well placement where the thicknesses of respective sub-units are about 50 and 30 feet with varying geomechanical and petrophysical properties. Additionally, this complexity poses limitations in completions and effective stimulation of the Kimmeridgian-Oxfordian reservoirs in several gas fields at development stage in Kuwait.
A horizontal well is placed in the lower sub-unit of the laminated complex of unconventional kerogen and fractured carbonate reservoir as a Maximum Reservoir Contact (MRC) type well. A pilot mother-bore was drilled and logged to identify the lithological properties across the entire vertical domain - facilitates the optimization of horizontal drain-hole placement within the targeted reservoir units.
No wellbore stability issues in drilling were predicted based on the geomechanical understanding where core-calibrated logs from offset vertical wells were considered. However, this modeling method did not have the functionality to integrate the impact of drawdown on the laminated formation which became unstable and collapsed during the short open-hole drill-stem test (DST) plugging the tubing prior to the final completions. An alternative "book-shelf?? geomechanical model was considered at pre-drill stage for predicting the wellbore stability. Once the drilling was completed, the time-lapsed multi-arm caliper indicated the validity of the alternative methodology in predicting the unstable stack of laminations in kerogen-rich strata.
The paper discusses an optimization methodology to enhance the understanding of static and dynamic geomechanical stability through the use of BHI data. Objective of the proposed method is to help improve the effectiveness of completions where wellbore stability due to geomechanical complexity in stacked-pay reservoirs is a primary wellbore challenge in deploying the completions and executing a subsequent stimulation and testing campaign.