|Theme||Visible||Selectable||Appearance||Zoom Range (now: 0)|
Rodríguez-Pradilla, Germán (School of Earth Sciences, University of Bristol, UK.) | Eaton, David (Department of Geoscience, University of Calgary, Canada.) | Popp, Melanie (geoLOGIC Systems Ltd., Calgary, Canada.)
Abstract The goal of this work is to calibrate a regional predictive model for maximum magnitude of seismic activity associated with hydraulic-fracturing in low-permeability formations in the Western Canada Sedimentary Basin (WCSB). Hydraulic fracturing data (i.e. total injected volume, injection rate, and pressure) were compiled from more than 40,000 hydraulic-fractured wells in the WCSB. These wells were drilled into more than 100 different formations over a 20-year period (January 1st, 2000 and January 1st, 2020). The total injected volume per unit area was calculated utilizing an area of 0.2° in longitude by 0.1° in latitude (or approximately 13x11km, somewhat larger than a standard township of 6x6 miles). This volume was then used to correlate with reported seismicity in the same unit areas. Collectively, within the 143 km area considered in this study, a correlation between the total injected volume and the maximum magnitude of seismic events was observed. Results are similar to the maximum-magnitude forecasting model proposed by A. McGarr (JGR, 2014) for seismic events induced by wastewater injection wells in central US. The McGarr method is also based on the total injected fluid per well (or per multiple nearby wells located in the same unit area). However, in some areas in the WCSB, lower injected fluid volumes than the McGarr model predicts were needed to induce seismic events of magnitude 3.0 or higher, although with a similar linear relation. The result of this work is the calculation of a calibration parameter for the McGarr model to better predict the magnitudes of seismic events associated with the injected volumes of hydraulic fracturing. This model can be used to predict induced seismicity in future unconventional hydraulic fracturing treatments and prevent large-magnitude seismic events from occurring. The rich dataset available from the WCSB allowed us to carry out a robust analysis of the influence of critical parameters (such as the total injected fluid) in the maximum magnitude of seismic events associated with the hydraulic-fracturing stimulation of unconventional wells. This analysis could be replicated for any other sedimentary basin with unconventional wells by compiling similar stimulation and earthquake data as in this study.