|Theme||Visible||Selectable||Appearance||Zoom Range (now: 0)|
Devon Energy has established new environmental performance targets focused on reducing the carbon intensity of its operations, minimizing freshwater use, and engaging constructively with its value chain. The company said it will lean on its use of advanced technologies to improve efficiencies across the business, which it said will be key to delivering on its ambition to achieve net zero greenhouse-gas (GHG) emissions for Scopes 1 and 2 by 2050. Scope 1 includes direct emissions from facilities, while Scope 2 includes emissions related to purchased electricity. In pursuit of continued transparency, Devon said it will refresh its Climate Change Assessment Report by the end of 2021, outlining its approach to proactively address climate-related risks and opportunities. "We know that strong environmental performance is essential to protecting the communities in which we live and operate, managing risk, and generating long-term value for stakeholders," said Rick Muncrief, president and chief executive officer at Devon.
Occidental Petroleum (Oxy) said this week it has agreed to sell almost 25,000 net acres in the Permian Basin of Texas to Colgate Energy Partners III for nearly $508 million. Average output of the properties amounts to 10,000 BOE/D from about 360 wells in the southern Delaware Basin, Houston-based Oxy reported in its announcement. The sale, expected to close in the third quarter, will boost Midland-based Colgate's holdings in the Permian to about 83,000 acres with an estimated production of 55,000. Colgate said it plans to run up to six drilling rigs by year's end and boost average production to 75,000 BOE/D by 2022. Proceeds from the sale will be used to pay down Oxy's debt that was around $35.4 billion in March, down slightly from the $36.03-billion debt reported last June.
Free data from the first Permian Hydraulic Fracturing Test Site is available online and reports from the second test site will be available this summer. Those reports offer a unique look at fracturing in the Midland and Delaware Basins, using nearly every diagnostic test an engineer can think of and analysis by technology leaders including Occidental and Shell among the partners. Because the US government shares the cost with industry partners, the data are made publicly available after a period during which the companies that pay half the cost have exclusive access to it. The data posted draw on work begun more than 5 years ago. It is available on the National Energy Technology Laboratory's EDX data sharing site (details below). The files offer processed data from testing done at an 11-well pad in the Midland Basin dating back to 2015, said Gary Covatch, a petroleum engineer at the US Department of Energy.
Abstract Drilling challenging wells requires a combination of drilling analytics and comprehensive simulation to prevent poor drilling performance and avoid drilling issues for the upcoming drilling campaign. This work focuses on the capabilities of a drilling simulator that can simulate the directional drilling process with the use of actual field data for the training of students and professionals. This paper presents the results of simulating both rotating and sliding modes and successfully matching the rate of penetration and the trajectory of an S-type well. Monitored drilling data from the well were used to simulate the drilling process. These included weight on bit, revolutions per minute, flow rate, bit type, inclination and drilling fluid properties. The well was an S-type well with maximum inclination of 16 degrees. There were continuous variations from rotating to sliding mode, and the challenge was approached by classifying drilling data into intervals of 20 feet to obtain an appropriate resolution and efficient simulation. The simulator requires formation strength, pore and fracture pressures, and details of well lithology, thus simulating the actual drilling environment. The uniaxial compressive strength of the rock layer is calculated from p–wave velocity data from an offset field. Rock drillability is finally estimated as a function of the rock properties of the drilled layer, bit type and the values of the drilling parameters. It is then converted to rate of penetration and matched to actual data. Changes in the drilling parameters were followed as per the field data. The simulator reproduces the drilling process in real-time and allows the driller to make instantaneous changes to all drilling parameters. The simulator provides the rate of penetration, torque, standpipe pressure, and trajectory as output. This enables the user to have on-the-fly interference with the drilling process and allows him/her to modify any of the important drilling parameters. Thus, the user can determine the effect of such changes on the effectiveness of drilling, which can lead to effective drilling optimization. Certain intervals were investigated independently to give a more detailed analysis of the simulation outcome. Additional drilling data such as hook load and standpipe pressure were analyzed to determine and evaluate the drilling performance of a particular interval and to consider them in the optimization process. The resulting rate of penetration and well trajectory simulation results show an excellent match with field data. The simulation illustrates the continuous change between rotating and sliding mode as well as the accurate synchronous matching of the rate of penetration and trajectory. The results prove that the simulator is an excellent tool for students and professionals to simulate the drilling process prior to actual drilling of the next inclined well.
Abstract Openhole oil sampling in the tight Middle Cretaceous reservoirs of Alaska can be challenging due to the proximity of the reservoir pressure to the fluid’s saturation pressure. Existing focused probe technologies commonly used in other conditions have limited application in these conditions because their small flow area means slow pumping rates, high drawdowns, and nonrepresentative fluid samples. Nonfocused inlets, such as 3D radial probes and straddle packers, are mostly used to sample in these reservoirs, but deep invasion and slow pumping rates mean using these alternatives leads to long station times. A new wireline formation testing platform has been field tested in three wells since 2018. The objectives included the evaluation of the platform’s abilities to pump at controlled speeds to keep flowing pressures always above the fluid’s expected saturation pressures. A new inlet was tested for focused sampling and higher flow rates with the intention of cutting operating time and improving sample quality. Also, increased sample container capacity enabled the collection of required sample volumes in fewer bottles, which resulted in a shorter and lighter sampling string configuration. A legacy pressure tool was added to the bottom of the new platform for pressure testing benchmarking. During the operation, the tool was positioned at target depth, and an automated routine inflated the inlet assembly to contact the formation. This automation cycle enables the tool to be ready for pumping in less than 15 minutes. In contrast, technologies used in previous operations required 30 to 45 minutes setup time before fluid cleanup could commence. Fluids were then flowed through the tool’s sample and guard lines with a sequence of commingling and focused pumping periods using two simultaneous pumps while assessing fluid quality with a downhole fluid analyzer. Strict control of the 1-cm/s selected rate for both pumps provided fast cleanup in focused mode with less than 100-psi drawdown. This has never been achieved before in these reservoirs. First hydrocarbon breakthrough was observed less than an hour into the pumping period. Previous operations reported 4 hours or more for first hydrocarbon breakthrough. Three stations were performed, and 10 single-phase samples were collected in as many bottles. Thin-bedded interval testing was possible given the ability of the new platform to collect samples with either the sample or guard lines. Total operating time to complete the program was 30 hours. Comparison with data from similar operations in previous campaigns shows a decrease of 50% in operating time, faster rig- up and rig-down, and decreased cable tension. These latter two aspects add to operational efficiency and mitigation of risks. This case study summarizes several pioneering aspects of the new generation of wireline formation testing platforms. It was the first time a combination of the new and legacy technology was deployed and the first time that high-volume multiphase sample bottles were used during a field test. It was also one of the first applications of this new technology in North America.
Johnson, Andrew C. (Schlumberger) | Miles, Jeffrey (Schlumberger) | Mosse, Laurent (Schlumberger) | Laronga, Robert (Schlumberger) | Lujan, Violeta (Schlumberger) | Aryal, Niranjan (Schlumberger) | Nwosu, Dozie (Schlumberger)
Abstract Formation water saturation is a critical target property for any comprehensive well log analysis program. Most techniques for computing saturation depend heavily on an analyst’s ability to accurately model resistivity measurements for the effects of formation water resistivity and rock texture. However, the pre-requisite knowledge of formation water properties, particularly salinity, is often either unknown, varying with depth or lateral extent, or is difficult to derive from traditional methods. A high degree of variability may be present due to fluid migration from production, water injection, or various geological mechanisms. In unconventional reservoirs, the complexity of the rocks and pore structure further complicates traditional interpretation of the available well logs. These factors introduce significant uncertainties in the computed fluid saturations and therefore can substantially affect final reserves estimates. A novel technique in geochemical spectroscopy has recently been introduced to distinguish the chlorine signals of the formation and borehole. The new, quantitative measurement of formation chlorine enables a direct calculation of bulk water volume for a given formation water salinity. When integrated into a multi-physics log analysis workflow, the chlorine-derived water volume can provide critical information on fluid saturations, hydrocarbon-in-place, and producibility indicators. This additional information is especially useful for characterizing challenging and complex unconventional reservoirs. We present the new technique through several full petrophysical evaluation case studies in organic shale formations across the U.S., including the Midland, Delaware, Marcellus, and DJ basins. We solve for formation-specific water salinity and bulk water volume through an optimization that combines chlorine concentration with resistivity and dielectric measurements. These outputs are integrated into comprehensive petrophysical evaluations, leveraging a suite of advanced well log measurements to compute final fluid and rock properties and volumetrics. The evaluations include geochemical mineralogy logs, 2D NMR analyses, dielectric dispersion analyses, basic log measurements, and multi-mineral models. The results underscore the utility of the new spectroscopy chlorine log to reduce petrophysical model uncertainties in an integrated workflow. While this workflow has been demonstrated here in several U.S. organic shale case studies, the fundamental challenges it addresses will make it a valuable solution for a range of unconventional reservoirs globally.
Nicholson, A. Kirby (Pressure Diagnostics Ltd.) | Bachman, Robert C. (Pressure Diagnostics Ltd.) | Scherz, R. Yvonne (Endeavor Energy Resources) | Hawkes, Robert V. (Cordax Evaluation Technologies Inc.)
Abstract Pressure and stage volume are the least expensive and most readily available data for diagnostic analysis of hydraulic fracturing operations. Case history data from the Midland Basin is used to demonstrate how high-quality, time-synchronized pressure measurements at a treatment and an offsetting shut-in producing well can provide the necessary input to calculate fracture geometries at both wells and estimate perforation cluster efficiency at the treatment well. No special wellbore monitoring equipment is required. In summary, the methods outlined in this paper quantifies fracture geometries as compared to the more general observations of Daneshy (2020) and Haustveit et al. (2020). Pressures collected in Diagnostic Fracture Injection Tests (DFITs), select toe-stage full-scale fracture treatments, and offset observation wells are used to demonstrate a simple workflow. The pressure data combined with Volume to First Response (Vfr) at the observation well is used to create a geometry model of fracture length, width, and height estimates at the treatment well as illustrated in Figure 1. The producing fracture length of the observation well is also determined. Pressure Transient Analysis (PTA) techniques, a Perkins-Kern-Nordgren (PKN) fracture propagation model and offset well Fracture Driven Interaction (FDI) pressures are used to quantify hydraulic fracture dimensions. The PTA-derived Farfield Fracture Extension Pressure, FFEP, concept was introduced in Nicholson et al. (2019) and is summarized in Appendix B of this paper. FFEP replaces Instantaneous Shut-In Pressure, ISIP, for use in net pressure calculations. FFEP is determined and utilized in both DFITs and full-scale fracture inter-stage fall-off data. The use of the Primary Pressure Derivative (PPD) to accurately identify FFEP simplifies and speeds up the analysis, allowing for real time treatment decisions. This new technique is called Rapid-PTA. Additionally, the plotted shape and gradient of the observation-well pressure response can identify whether FDI's are hydraulic or poroelastic before a fracture stage is completed and may be used to change stage volume on the fly. Figure 1: Fracture Geometry Model with FDI Pressure Matching Case studies are presented showing the full workflow required to generate the fracture geometry model. The component inputs for the model are presented including a toe-stage DFIT, inter-stage pressure fall-off, and the FDI pressure build-up. We discuss how to optimize these hydraulic fractures in hindsight (look-back) and what might have been done in real time during the completion operations given this workflow and field-ready advanced data-handling capability. Hydraulic fracturing operations can be optimized in real time using new Rapid-PTA techniques for high quality pressure data collected on treating and observation wells. This process opens the door for more advanced geometry modeling and for rapid design changes to save costs and improve well productivity and ultimate recovery.
Suarez-Rivera, Roberto (W. D. Von Gonten Laboratories) | Panse, Rohit (W. D. Von Gonten Laboratories) | Sovizi, Javad (Baker Hughes) | Dontsov, Egor (ResFrac Corporation) | LaReau, Heather (BP America Production Company, BPx Energy Inc.) | Suter, Kirke (BP America Production Company, BPx Energy Inc.) | Blose, Matthew (BP America Production Company, BPx Energy Inc.) | Hailu, Thomas (BP America Production Company, BPx Energy Inc.) | Koontz, Kyle (BP America Production Company, BPx Energy Inc.)
Abstract Predicting fracture behavior is important for well placement design and for optimizing multi-well development production. This requires the use of fracturing models that are calibrated to represent field measurements. However, because hydraulic fracture models include complex physics and uncertainties and have many variables defining these, the problem of calibrating modeling results with field responses is ill-posed. There are more model variables than can be changed than field observations to constrain these. It is always possible to find a calibrated model that reproduces the field data. However, the model is not unique and multiple matching solutions exist. The objective and scope of this work is to define a workflow for constraining these solutions and obtaining a more representative model for forecasting and optimization. We used field data from a multi-pad project in the Delaware play, with actual pump schedules, frac sequence, and time delays as used in the field, for all stages and all wells. We constructed a hydraulic fracturing model using high-confidence rock properties data and calibrated the model to field stimulation treatment data varying the two model variables with highest uncertainty: tectonic strain and average leak-off coefficient, while keeping all other model variables fixed. By reducing the number of adjusting model variables for calibration, we significantly lower the potential for over-fitting. Using an ultra-fast hydraulic fracturing simulator, we solved a global optimization problem to minimize the mismatch between the ISIPs and treatment pressures measured in the field and simulated by the model, for all the stages and all wells. This workflow helps us match the dominant ISIP trends in the field data and delivers higher confidence predictions in the regional stress. However, the uncertainty in the fracture geometry is still large. We also compared these results with traditional workflows that rely on selecting representative stages for calibration to field data. Results show that our workflow defines a better global optimum that best represents the behavior of all stages on all wells, and allows us to provide higher-confidence predictions of fracturing results for subsequent pads. We then used this higher confidence model to conduct sensitivity analysis for improving the well placement in subsequent pads and compared the results of the model predictions with the actual pad results.
ABSTRACT The industry is facing significant challenges due to the recent downturn in oil prices, particularly for the development of tight reservoirs. It is more critical than ever to 1) identify the sweet spots with less uncertainty and 2) optimize the completion-design parameters. The overall objective of this study is to quantify and compare the effects of reservoir quality and completion intensity on well productivity. We developed a supervised fuzzy clustering (SFC) algorithm to rank reservoir quality and completion intensity, and analyze their relative impacts on wells' productivity. We collected reservoir properties and completion-design parameters of 1,784 horizontal oil and gas wells completed in the Western Canadian Sedimentary Basin. Then, we used SFC to classify 1) reservoir quality represented by porosity, hydrocarbon saturation, net pay thickness and initial reservoir pressure; and 2) completion-design intensity represented by proppant concentration, number of stages and injected water volume per stage. Finally, we investigated the relative impacts of reservoir quality and completion intensity on wells' productivity in terms of first year cumulative barrel of oil equivalent (BOE). The results show that in low-quality reservoirs, wells' productivity follows reservoir quality. However, in high-quality reservoirs, the role of completion-design becomes significant, and the productivity can be deterred by inefficient completion design. The results suggest that in low-quality reservoirs, the productivity can be enhanced with less intense completion design, while in high-quality reservoirs, a more intense completion significantly enhances the productivity. Keywords Reservoir quality; completion intensity; supervised fuzzy clustering, approximate reasoning,tight reservoirs development
Wu, Yinghui (Silixa LLC) | Hull, Robert (Silixa LLC) | Tucker, Andrew (Apache Corp.) | Rice, Craig (Apache Corp.) | Richter, Peter (Silixa LLC) | Wygal, Ben (Silixa LLC) | Farhadiroushan, Mahmoud (Silixa Ltd.) | Trujillo, Kirk (Silixa LLC) | Woerpel, Craig (Silixa LLC)
Abstract Distributed fiber-optic sensing (DFOS) has been utilized in unconventional reservoirs for hydraulic fracture efficiency diagnostics for many years. Downhole fiber cables can be permanently installed external to the casing to monitor and measure the uniformity and efficiency of individual clusters and stages during the completion in the near-field wellbore environment. Ideally, a second fiber or multiple fibers can be deployed in offset well(s) to monitor and characterize fracture geometries recorded by fracture-driven interactions or frac-hits in the far-field. Fracture opening and closing, stress shadow creation and relaxation, along with stage isolation can be clearly identified. Most importantly, fracture propagation from the near to far-field can be better understood and correlated. With our current technology, we can deploy cost effective retrievable fibers to record these far-field data. Our objective here is to highlight key data that can be gathered with multiple fibers in a carefully planned well-spacing study and to evaluate and understand the correspondence between far-field and near-field Distributed Acoustic Sensing (DAS) data. In this paper, we present a case study of three adjacent horizontal wells equipped with fiber in the Permian basin. We can correlate the near-field fluid allocation across a stage down to the cluster level to far-field fracture driven interactions (FDIs) with their frac-hit strain intensity. With multiple fibers we can evaluate fracture geometry, the propagation of the hydraulic fractures, changes in the deformation related to completion designs, fracture complexity characterization and then integrate the results with other data to better understand the geomechanical processes between wells. Novel frac-hit corridor (FHC) is introduced to evaluate stage isolation, azimuth, and frac-hit intensity (FHI), which is measured in far-field. Frac design can be evaluated with the correlation from near-field allocation to far-field FHC and FHI. By analyzing multiple treatment and monitor wells, the correspondence can be further calibrated and examined. We observe the far-field FHC and FHI are directly related to the activities of near-field clusters and stages. A leaking plug may directly result in FHC overlapping, gaps and variations in FHI, which also can be correlated to cluster uniformity. A near-far field correspondence can be established to evaluate FHC and FHI behaviors. By utilizing various completion designs and related measurements (e.g. Distributed Temperature Sensing (DTS), gauges, microseismic etc.), optimization can be performed to change the frac design based on far-field and near-field DFOS data based on the Decision Tree Method (DTM). In summary, hydraulic fracture propagation can be better characterized, measured, and understood by deploying multiple fibers across a lease. The correspondence between the far-field measured FHC and FHI can be utilized for completion evaluation and diagnostics. As the observed strain is directly measured, completion engineering and geoscience teams can confidently optimize their understanding of the fracture designs in real-time.