|Theme||Visible||Selectable||Appearance||Zoom Range (now: 0)|
This page discusses various aspects of gas reservoir performance, primarily to determine initial gas in place and how much is recoverable. The equations developed can used to form the basis of forecasting future production rates by capturing the relationship between cumulative fluid production and average reservoir pressure. Material-balance equations provide a relationship between original fluids in place, cumulative fluid production, and average reservoir pressure. This equation is the basis for the p/z-vs.-Gp Reservoir engineers have often used pressure contour maps or some approximate methods to determine field average reservoir pressure for p/z analysis. Usually, however, individual well pressures are based on extrapolation of pressure buildup tests or from long shut-in periods. In either case, the average pressure measured does not represent a point value, but rather is the average value within the well's effective drainage volume (see Estimating drainage shapes).
Dealing with and exploiting fracturing of rock has been part of mining engineering for hundreds of years, but the analysis of fracture of rock or other materials has only developed into an engineering discipline since the mid 1940s . In petroleum engineering, fracture mechanics theories have been used for more than 50 years. Rock fracture mechanics is about understanding what will happen to the rocks in the subsurface when subjected to fracture stress. Much of what is used in hydraulic fracturing theory and design was developed by other engineering disciplines many years ago. However, rock formatons cannot often be treated as isotropic and homogeneous.
Fracture diagnostic techniques are divided into several groups. Direct far-field methods consists of tiltmeter-fracture-mapping and microseismic-fracture-mapping techniques. These techniques require sophisticated instrumentation embedded in boreholes surrounding the well to be fracture treated. When a hydraulic fracture is created, the expansion of the fracture causes the earth around the fracture to deform. Tiltmeters can be used to measure the deformation and to compute the approximate direction and size of the created fracture.
Since the most common use of matrix acidizing is the removal of formation damage, it is important to understand the nature of the damage that exists so that an appropriate treatment can be designed. Well testing and well test analysis generate a skin factor and well completion efficiency. This is insufficient alone for formation damage diagnosis. Well performance analysis has provided a beneficial tool to identify the location and thickness of damage at flow points in the near wellbore area. Models of flow into perforations and gravel-packed tunnels provide a way to relate the location and severity of damage to the completion procedure that preceded it.
Formation damage in gas/condensate reservoirs can be caused by a buildup of fluids (condensate) around the wellbore. This reduces the relative permeability and therefore gas production. This page discusses condensate banking and how to overcome its effects. As shown in Figure 1, gas/condensate reservoirs are defined as reservoirs that contain hydrocarbon mixtures that on pressure depletion cross the dewpoint line. In such instances as when the bottomhole pressure is reduced during production, the dewpoint pressure of the gas is reached in the near-wellbore region.
Producing formation damage has been defined as the impairment of the unseen by the inevitable, causing an unknown reduction in the unquantifiable. In a different context, formation damage is defined as the impairment to reservoir (reduced production) caused by wellbore fluids used during drilling/completion and workover operations. It is a zone of reduced permeability within the vicinity of the wellbore (skin) as a result of foreign-fluid invasion into the reservoir rock. Typically, any unintended impedance to the flow of fluids into or out of a wellbore is referred to as formation damage. This broad definition includes flow restrictions caused by a reduction in permeability in the near-wellbore region, changes in relative permeability to the hydrocarbon phase, and unintended flow restrictions in the completion itself. Flow restrictions in the tubing or those imposed by the well partially penetrating a reservoir or other aspects of the completion geometry are not included in this definition because, although they may impede flow, they either have been put in place by design to serve a specific purpose or do not show up in typical measures of formation damage such as skin.
Both the Rawlins and Schellhardt and Houpeurt analysis techniques are presented in terms of pseudopressures. Flow-after-flow tests, sometimes called gas backpressure or four-point tests, are conducted by producing the well at a series of different stabilized flow rates and measuring the stabilized BHFP at the sandface. Each different flow rate is established in succession either with or without a very short intermediate shut-in period. Conventional flow-after-flow tests often are conducted with a sequence of increasing flow rates; however, if stabilized flow rates are attained, the rate sequence does not affect the test. Fig 1 illustrates a flow-after-flow test.